Wear
S.No.
| Index | Volume 268, Issues 3-4, Pages 353-642 (4 February 2010) | -
|
Effect of intermittent fretting on corrosion behavior in electrical contact by Young Woo Park, Hyung Goun Joo, Kang Yong Lee
| -
|
Conformality effects on the wear of low-speed, large aspect ratio silicon journal microbearings by S. Demiri, S. Boedo, W.J. Grande
| -
|
Study of interfacial stiffness ratio of a rough surface in contact using a spring model by M. Gonzalez-Valadez, A. Baltazar, R.S. Dwyer-Joyce
| -
|
S.C. Scholes, A. Unsworth, The wear performance of PEEK-OPTIMA based self-mating couples
| -
|
F.J. Martinez, M. Canales, J.M. Bielsa, M.A. Jimenez, Relationship between wear rate and mechanical fatigue in sliding TPU-metal contacts
| -
|
H.B. He, H.Y. Li, S.K. Lyu, Tribological behavior of a 20CrMo alloy implanted with nitrogen ions by plasma source ion implantation
| -
|
M. Habibnejad-Korayem, R. Mahmudi, H.M. Ghasemi, W.J. Poole, Tribological behavior of pure Mg and AZ31 magnesium alloy strengthened by Al2O3 nano-particles
| -
|
R. Rybiak, S. Fouvry, B. Bonnet, Fretting wear of stainless steels under variable temperature conditions: Introduction of a `composite' wear law
| -
|
G.Y. Xie, G.S. Zhuang, G.X. Sui, R. Yang, Tribological behavior of PEEK/PTFE composites reinforced with potassium titanate whiskers
| -
|
Jeng Luen Liou, Chi Ming Tsai, Jen-Fin Lin, A microcontact model developed for sphere- and cylinder-based fractal bodies in contact with a rigid flat surface
| -
|
Th. Zisis, N.A. Fleck, The elastic-plastic indentation response of a columnar thermal barrier coating
| -
|
N. Argibay, J.A. Bares, W.G. Sawyer, Asymmetric wear behavior of self-mated copper fiber brush and slip-ring sliding electrical contacts in a humid carbon dioxide environment
| -
|
J. Karger-Kocsis, D. Felhos, D. Xu, Mechanical and tribological properties of rubber blends composed of HNBR and in situ produced polyurethane
| -
|
Jian Wang, Jiandong Xing, Li Cao, Wei Su, Yimin Gao, Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering
| -
|
James Shih-Shyn Wu, Shu-Ling Hsu, Jian-Horng Chen, Wear patterns of, and wear volume formulae for, hemispherical acetabular cup liners
| -
|
D. Marchetto, A. Rota, L. Calabri, G.C. Gazzadi, C. Menozzi, S. Valeri, Hydrophobic effect of surface patterning on Si surface
| -
|
Jorge A. Olortegui-Yume, Patrick Y. Kwon, Crater wear patterns analysis on multi-layer coated carbides using the wavelet transform
| -
|
Ji Chul Yang, Dong Won Oh, Gae Won Lee, Chang Lyung Song, Taesung Kim, Step height removal mechanism of chemical mechanical planarization (CMP) for sub-nano-surface finish
| -
|
Yefei Li, Yimin Gao, Three-body abrasive wear behavior of CC/high-Cr WCI composite and its interfacial characteristics
| -
|
H.J. Hwang, S.L. Jung, K.H. Cho, Y.J. Kim, H. Jang, Tribological performance of brake friction materials containing carbon nanotubes
| -
|
Jan-Erik Schmutz, Harald Fuchs, Hendrik Holscher, Measuring wear by combining friction force and dynamic force microscopy
| -
|
M.M. Stack, S.M. Abdelrahman, B.D. Jana, A new methodology for modelling erosion-corrosion regimes on real surfaces: Gliding down the galvanic series for a range of metal-corrosion systems
| -
|
O. Arias-Cuevas, Z. Li, R. Lewis, E.A. Gallardo-Hernandez, Rolling-sliding laboratory tests of friction modifiers in dry and wet wheel-rail contacts
| -
|
D. Munteanu, C. Ionescu, C. Olteanu, A. Munteanu, F. Davin, L. Cunha, C. Moura, F. Vaz, Influence of composition and structural properties in the tribological behaviour of magnetron sputtered Ti-Si-C nanostructured thin films, prepared at low temperature
| -
|
L. Gara, Q. Zou, B.P. Sangeorzan, G.C. Barber, H.E. McCormick, M.H. Mekari, Wear measurement of the cylinder liner of a single cylinder diesel engine using a replication method
| -
|
Temel Savaskan, Yasin Alemdag, Effect of nickel additions on the mechanical and sliding wear properties of Al-40Zn-3Cu alloy
| -
|
K.C. Goretta, J.I. Pena, V.M. Orera, Nan Chen, D. Singh, J.L. Routbort, Solid-particle erosion of directionally solidified Al2O3-ZrO2 (Y2O3) eutectics
| -
|
BoHoon Kim, Ramoun Mourhatch, Pranesh B. Aswath, Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions
| -
|
C.X. Li, A. Hussain, A. Kamali, Consideration of non-bearing surface condition and its potential effect on hip wear simulation test results
| -
|
C.H. Liu, C.H. Ding, Microstructure and tribological characterizations of Ni-based self-lubricating coating
| -
|
R. Mojaver, H.R. Shahverdi, The relationship between the wear behavior and microstructure features in end-chill cast Zn-27%Al alloy
| -
|
Paul Stratton, Michael Graf, Wear of diffusion hardened Ti-6Al-4V sliding against tool steel, Wear
| -
|
Vesa Saikko, Ming Shen, Wear comparison between a dual mobility total hip prosthesis and a typical modular design using a hip joint simulator
| -
|
H.R. Abedi, A. Fareghi, H. Saghafian, S.H. Kheirandish, Sliding wear behavior of a ferritic-pearlitic ductile cast iron with different nodule count
| -
|
Dong-Cherng Wen, Erosion and wear behavior of nitrocarburized DC53 tool steel
| -
|
Danna Qian, Limin Bao, Masayuki Takatera, Kiyoshi Kemmochi, Atsuhiko Yamanaka, Fiber-reinforced polymer composite materials with high specific strength and excellent solid particle erosion resistance
| Volume 268, Issues 5-6, Pages 643-854 (11 February 2010) | -
|
Saad Mukras, Nam H. Kim, Nathan A. Mauntler, Tony L. Schmitz, W. Gregory Sawyer, Analysis of planar multibody systems with revolute joint wear
| -
|
Chin-You Hsu, Tsing-Shien Sheu, Jien-Wei Yeh, Swe-Kai Chen, Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys
| -
|
N. Tassini, X. Quost, R. Lewis, R. Dwyer-Joyce, C. Ariaudo, N. Kuka, A numerical model of twin disc test arrangement for the evaluation of railway wheel wear prediction methods
| -
|
Emerson Escobar Nunez, Nicholaos G. Demas, Kyriaki Polychronopoulou, Andreas A. Polycarpou, Comparative scuffing performance and chemical analysis of metallic surfaces for air-conditioning compressors in the presence of environmentally friendly CO2 refrigerant
| -
|
Abhishek Chatterjee, Andreas A. Polycarpou, John R. Abelson, Pascal Bellon, Nanoscratch study of hard HfB2 thin films using experimental and finite element techniques
| -
|
Julien Cesbron, Hai Ping Yin, Contact analysis of road aggregate with friction using a direct numerical method, Wear
| -
|
T. Sun, Q. Wang, D.L. Sun, G.H. Wu, Y. Na, Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite
| -
|
T. Gomez-del Rio, A. Rico, M.A. Garrido, P. Poza, J. Rodriguez, Temperature and velocity transitions in dry sliding wear of Al-Li/SiC composites
| -
|
Lada A. Gyurova, Paz Minino-Justel, Alois K. Schlarb, Modeling the sliding wear and friction properties of polyphenylene sulfide composites using artificial neural networks
| -
|
M.A.Z. Vasconcellos, R. Hinrichs, J.B.M. da Cunha, M.R.F. Soares, Mossbauer spectroscopy characterization of automotive brake disc and polymer matrix composite (PMC) pad surfaces
| -
|
T. Murakami, H. Mano, K. Kaneda, M. Hata, S. Sasaki, J. Sugimura, Friction and wear properties of zirconium and niobium in a hydrogen environment
| -
|
Meiju Xie, Jinyao Chen, Huilin Li, Meng Li, Influence of poly(ethylene glycol)-containing additives on the sliding wear of ultrahigh molecular weight polyethylene/polypropylene blend
| -
|
S. Foletti, S. Beretta, G. Bucca, A numerical 3D model to study ratcheting damage of a tramcar line
| -
|
P. Gabriel, A.G. Thomas, J.J.C. Busfield, Influence of interface geometry on rubber friction
| -
|
V. Podgursky, R. Nisumaa, E. Adoberg, A. Surzhenkov, A. Sivitski, P. Kulu, Comparative study of surface roughness and tribological behavior during running-in period of hard coatings deposited by lateral rotating cathode arc
| -
|
H. Liang, Y. Fukahori, A.G. Thomas, J.J.C. Busfield, The steady state abrasion of rubber: Why are the weakest rubber compounds so good in abrasion?
| -
|
Jens Wahlstrom, Anders Soderberg, Lars Olander, Anders Jansson, Ulf Olofsson, A pin-on-disc simulation of airborne wear particles from disc brakes
| -
|
S. Hassani, M. Bielawski, W. Beres, M. Balazinski, L. Martinu, J.E. Klemberg-Sapieha, Impact stress absorption and load spreading in multi-layered erosion-resistant coatings
| -
|
Shuyun Jiang, Shifei Yang, Synergistic effect of diisopropyl phosphite and triphenyl thiophosphate additives on tribological properties of T8 steel/Al2O3 ceramics
| -
|
C. Ferrer, M. Pascual, D. Busquets, E. Rayon, Tribological study of Fe-Cu-Cr-graphite alloy and cast iron railway brake shoes by pin-on-disc technique
| -
|
Wei Cong, Zhengjun Yao, Xiaolin Zhu, Sliding wear of low carbon steel modified by double-glow plasma surface alloying with nickel and chromium at various temperatures
| -
|
S. Bhuyan, S. Sundararajan, Y. Lu, R.C. Larock, A study of the physical and tribological properties of biobased polymer-clay nanocomposites at different clay concentrations
| -
|
Hsien-Chang Kuo, Ming-Chang Jeng, The influence of injection molding on tribological characteristics of ultra-high molecular weight polyethylene under dry sliding
| -
|
Yibo Fan, Fengshou Gu, Andrew Ball, Modelling acoustic emissions generated by sliding friction
| -
|
D.B. Luo, V. Fridrici, Ph. Kapsa, Selecting solid lubricant coatings under fretting conditions
| -
|
B. Torres, M.A. Garrido, A. Rico, P. Rodrigo, M. Campo, J. Rams, Wear behaviour of thermal spray Al/SiCp coatings
| -
|
J. Xin, W. Cai, J.A. Tichy, A fundamental model proposed for material removal in chemical-mechanical polishing
| -
|
P. Prokopovich, S. Theodossiades, H. Rahnejat, D. Hodson, Friction in ultra-thin conjunction of valve seals of pressurised metered dose inhalers
| -
|
S. Tarasov, V. Rubtsov, A. Kolubaev, Corrigendum to 'Subsurface shear instability and nanostructuring of metals in sliding' [Wear 268 (2010) 59-66]
| Volume 268, Issues 7-8, Pages 855-1044 (9 March 2010) | -
|
Shuji Hattori, Kohei Maeda, Logistic curve model of cavitation erosion progress in metallic materials
| -
|
Y.Q. Wang, A.M. Afsar, J.H. Jang, K.S. Han, J.I. Song, Room temperature dry and lubricant wear behaviors of Al2O3f/SiCp/Al hybrid metal matrix composites
| -
|
Andreas Gebhard, Thomas Bayerl, Alois K. Schlarb, Klaus Friedrich, Increased wear of aqueous lubricated short carbon fiber reinforced polyetheretherketone (PEEK/SCF) composites due to galvanic fiber corrosion
| -
|
A.I. Dmitriev, M. Schargott, V.L. Popov, Direct modelling of surface topography development in a micro-contact with the movable cellular automata method
| -
|
N.P. Hoffmann, U. Stolz, On transient growth of wear pattern properties
| -
|
G. Zhang, Z. Rasheva, A.K. Schlarb, Friction and wear variations of short carbon fiber (SCF)/PTFE/graphite (10 vol.%) filled PEEK: Effects of fiber orientation and nominal contact pressure
| -
|
David A. Hills, Robert J.H. Paynter, David Nowell, The effect of wear on nucleation of cracks at the edge of an almost complete contact
| -
|
R. Feulner, Z. Brocka, A. Seefried, M.O. Kobes, G. Hulder, T.A. Osswald, The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact
| -
|
Keiji Sasaki, Naruhiko Inayoshi, Kohji Tashiro, Friction-induced dynamic chemical changes of tricresyl phosphate as lubricant additive observed under boundary lubrication with 2D fast imaging FTIR-ATR spectrometer
| -
|
Yanqiu Xia, Feng Zhou, Shinya Sasaki, Takashi Murakami, Meihuan Yao, Remarkable friction stabilization of AISI 52100 steel by plasma nitriding under lubrication of alkyl naphthalene
| -
|
Satoru Maegawa, Ken Nakano, Mechanism of stick-slip associated with Schallamach waves
| -
|
S. Graca, R. Vilar, R. Colaco, The role of indentation size effect on the abrasive wear behaviour of ductile metallic materials: A nanotribological study
| -
|
S.Y. Zhang, S.G. Qu, Y.Y. Li, W.P. Chen, Two-body abrasive behavior of brake pad dry sliding against interpenetrating network ceramics/Al-alloy composites
| -
|
P.J. Dunstan, S.C. Li, Cavitation enhancement of silt erosion: Numerical studies
| -
|
W. Schork, B. Schultrich, V. Weihnacht, A new kind of oscillating dynamic load test for tribological coatings
| -
|
Hsiao Yeh Chu, Wen Chen Hsu, Jen Fin Lin, The anti-scuffing performance of diamond nano-particles as an oil additive
| -
|
A. Gaard, N. Hallback, P. Krakhmalev, J. Bergstrom, Temperature effects on adhesive wear in dry sliding contacts
| -
|
Yanqiang Liu, Zhong Han, Hongtao Cong, Effects of sliding velocity and normal load on the tribological behavior of a nanocrystalline Al based composite
| -
|
B. Lorenz, G. Carbone, C. Schulze, Average separation between a rough surface and a rubber block: Comparison between theories and experiments
| -
|
Lin Wang, Jiqiang Ma, Jun Yang, Qinling Bi, Licai Fu, Weimin Liu, Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy
| -
|
Zhi-ning Jia, Yu-lin Yang, Jin-jiang Chen, Xiao-jing Yu, Influence of serpentine content on tribological behaviors of PTFE/serpentine composite under dry sliding condition
| -
|
A. Mohajerani, J.K. Spelt, Numerical modeling of the edge rounding of brittle materials by vibratory finishing
| -
|
Junhu Meng, Ngiap Hiang Loh, Bee Yen Tay, Gang Fu, Shu Beng Tor, Tribological behavior of 316L stainless steel fabricated by micro powder injection molding,
| -
|
Marco Paggi, Michele Ciavarella, The coefficient of proportionality [kappa] between real contact area and load, with new asperity models
| -
|
Myo Minn, Sujeet K. Sinha, The frictional behavior of UHMWPE films with different surface energies at low normal loads
| -
|
G. Verberne, A. Schroeder, G. Halperin, Y. Barenholz, I. Etsion, Liposomes as potential biolubricant additives for wear reduction in human synovial joints
| -
|
Danna Qian, Limin Bao, Masayuki Takatera, Kiyoshi Kemmochi, Atsuhiko Yamanaka, Corrigendum to 'Fiber-reinforced polymer composite materials with high specific strength and excellent solid particle erosion resistance' [Wear 268 (3-4) 637-642],
| Volume 268, Issues 8-10, Pages 1045-1204 (25 March 2010) | -
|
S. Olovsjo, A. Wretland, G. Sjoberg, The effect of grain size and hardness of wrought Alloy 718 on the wear of cemented carbide tools
| |
Yüklə 0.83 Mb.