S.No.
| Index |
Volume 224, Number 1 / 2010 |
-
|
Eighty years of research on hydraulic reciprocating seals: review of tribological studies and related topics since the 1930s by G K Nikas
|
-
|
Surface defects effects on bearing dynamics by A Ashtekar, F Sadeghi and L-E Stacke
|
-
|
Influence of the bushing geometry on the thermohydrodynamic performance of a misaligned journal bearing by A Mihailidis, V Bakolas, K Panagiotidis, K Poulios and C Sachanas
|
-
|
Film-forming properties and traction of non- functionalized polyalkylmethacrylate solutions under transition from elastohydrodynamic lubrication to thin-film lubrication by M Muraki and K Nakamura
|
-
|
Tribological behaviour of two ash-less and phosphorous-free anti-wear additives and their synergetic effect with zinc dialkyldithiophosphates in mineral oil by P Liang, T Ren, J Li, H Ma and H Wu
|
-
|
Tribological behaviour of lubricated surfaces under application of electric current by M M Mahmoud, M K Mohamed and W Y Ali
|
-
|
The performance of a porous ceramic hydrostatic journal bearing by I S Durazo-Cardenas, J Corbett and D J Stephenson
|
-
|
Comparative evaluation of dry sliding wear behaviour of plasma transferred arc hardfaced surfaces by the pin-on-roller method by C S Ramachandran, V Balasubramanian and R Varahamoorthy
|
-
|
Study of mechanical and metallurgical characteristics of flame sprayed NiCrBSi as-sprayed and continuous compacted coating by S P Sharma, D K Dwivedi and P K Jain
|
-
|
Experimental study of tilting pad journal bearing–rotor system with acoustic emission technique by G-H Zhang, Z-S Liu, X-W Wang and H-J Xu
|
Volume 224, Number 2 / 2010 |
1.
|
Wet adhesive wear characteristics of untreated oil palm fibre-reinforced polyester and treated oil palm fibre-reinforced polyester composites using the pin-on-disc and block-on-ring techniques by B F Yousif and N S M El-Tayeb
|
2.
|
Effect of apparent area, load, and filler content on sliding friction characteristics of polymer nanocomposites by S Kirupasankar, R Gnanamoorthy and R Velmurugan
|
3.
|
Effect of bearing number on non-linear dynamic behaviour of aerodynamic non-circular journal bearing systems by R Rashidi, A Karami Mohammadi and F Bakhtiari-Nejad
|
4.
|
Modelling and analysis of erosion wear behaviour of hybrid composites using Taguchi experimental design by S S Mahapatra
|
5.
|
On the utilization of pin-on-disc simulative tests for the calibration of friction in metal cutting by V A M Cristino, P A R Rosa and P A F Martins
|
6.
|
Airborne wear particles from passenger car disc brakes: a comparison of measurements from field tests, a disc brake assembly test stand, and a pin-on-disc machine by J Wahlström, A Söderberg, L Olander, U Olofsson and A Jansson
|
7.
|
Mechanical properties and wear behaviours of CrN/TaN nanoscale multilayered thin films by Y J Kim, T J Byun and J G Han
|
8.
|
On the squeeze flow between two rigid spheres with partially wetted surfaces by W-L Li
|
9.
|
A method to monitor non-ferrous debris in ferrographic analysis by T-G Liu, S-J Liu and Z-Y Yang
|
10.
|
Monitoring of dry cutting and applications of cutting fluid by S Tangjitsitcharoen
|
11.
|
The potential of plasma electrolytic oxidized eutectic aluminium–silicon alloy as a cylinder wall surface for lightweight engine blocks by K Mistry, M Priest and S Shrestha
|
Volume 224, Number 3 / 2010 |
1.
|
Effects of recess shapes on pneumatic hammering in aerostatic bearings by Y X Ye, X D Chen, Y T Hu and X Luo
|
2.
|
Anharmonic variations in elastohydrodynamic film thickness resulting from harmonically varying entrainment velocity by P Kumar, M M Khonsari and S Bair
|
3.
|
On the squeeze film lubrication of rough short porous partial journal bearings with micropolar fluids by N B Naduvinamani, S Santosh and A Siddanagouda
|
4.
|
Enhancement of journal bearings characteristics using novel elliptical grooves by R-H Yen and C-Y Chen
|
5.
|
Effect of surface temperature rise on friction characteristics for sliding speed under unlubricated condition by T Nakahara, S Momozono and A O-rui
|
6.
|
The effect of the addition of graphite on tribological properties of glass fibre-reinforced polyimide composites by J Li
|
7.
|
Effect of high-pressure hydrogen exposure on wear of polytetrafluoroethylene sliding against stainless steel byK Nakashima, A Yamaguchi, Y Kurono, Y Sawae, T Murakami and J Sugimura
|
8.
|
The influence of natural frequency of the experimental set-up on the friction coefficient of copper by M A Chowdhury, S Md I Karim and M L Ali
|
9.
|
Whole crankshaft beam-element finite-element method for calculating crankshaft deformation and bearing load of an engine by J Sun, J Wang and C Gui
|
Volume 224, Number 4 / 2010 |
1
|
Influence of pad and runner mechanical deformations on the performance of a hydrodynamic fixed geometry thrust bearing by S A Ahmed, M Fillon and P Maspeyrot
|
2
|
Analysis of thermal effects in capillary compensated hole-entry hybrid journal bearings lubricated with a non-Newtonian lubricant by H C Garg and V Kumar
|
3
|
A mixed lubrication model incorporating measured surface topography. Part 1: theory of flow factors by F Sahlin, R Larsson, A Almqvist, P M Lugt and P Marklund
|
4
|
A mixed lubrication model incorporating measured surface topography. Part 2: roughness treatment, model validation, and simulation by F Sahlin, R Larsson, P Marklund, A Almqvist and P M Lugt
|
|
Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements by Authors J Kleemola and A Lehtovaara
|
|
Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics – state of the art by Authors J Halme and P Andersson
|
|
On the tribo-cryogenic characteristics of titanium alloys by Authors N S M El-Tayeb, T C Yap and P V Brevern
|
Volume 224, Number 5 / 2010 |
1
|
Effect of friction force between piston rings and liner: a parametric study of speed, load, temperature, piston-ring curvature, and high-temperature, high-shear viscosity by Author P S Dellis
|
2
|
On the state and severity of frictional sliding contacts between nominally flat metallic surfaces by Authors L Chang and H Zhang
|
3
|
Adhesive contact of curved surfaces by Authors P Sahoo, A Mitra and K Saha
|
4
|
A state-of-the-art review on the effects of particulate contamination and related topics in machine-element contacts by Author G K Nikas
|
5
|
Influence of particle size, applied load, and fibre orientation on 3B-A wear and frictional behaviour of epoxy composite based on kenaf fibres by Authors C W Chin and F Yousif
|
6
|
Effects of load and sliding velocity on abrasive wear of Lantana camara fibre-reinforced polymer matrix composite by Authors C Deo and S K Acharya
|
7
|
Sliding wear characterization of microwave-glazed plasma-sprayed ceramic composites by Authors A K Sharma and R Krishnamurthy
|
8
|
A static friction model for the contact of fractal surfaces by Authors J-M You and T-N Chen
|
Volume 224, Number 6 / 2010 |
1
|
A comparative study of ultrasonic direct contact, immersion, and layer resonance methods for assessment of enamel thickness in teeth by Authors R S Dwyer-Joyce, M A Goodman and R Lewis
|
2
|
Nanoscratch resistance of human tooth enamel treated by Nd:YAG laser irradiation by Authors S Gao, S Huang, L Qian and H Yu
|
3
|
Tooth cleaning and tooth wear: a review by Authors A T Ashcroft and A Joiner
|
4
|
New insights into tooth wear based on in vitro studies by Authors L C Richards, J A Kaidonis and G C Townsend
|
5
|
A comparative study of tribological behaviour of dental composites and tooth enamel: an energy approach by Author E Sajewicz
|
6
|
Wear mechanisms in the mouth by Authors L H Mair and P Padipatvuthikul
|
7
|
Nanomechanical properties and microtribological behaviours of human tooth enamel byAuthors J Zheng, Y Huang, L M Qian and Z R Zhou
|
8
|
An experimental investigation into dental wear: tooth–tooth contact by Authors M A Masen, A van't Spijker and C M Kreulen
|
Volume 224, Number 7 / 2010 |
1
|
new fluid film force model of elliptical bearing: modelling and case studies by Authors J-L Wang, D Q Cao and W-H Huang
|
2
|
Three-dimensional numerical analysis of hydrodynamic characteristics of axial groove journal bearings running with ferrofluids under magnetic field by Authors Y Sheikh Nejad and S A Gandjalikhan Nassab
|
3
|
Micro-geometry effects on the sliding friction transition in elastohydrodynamic lubrication by Authors G E Morales-Espejel, A W Wemekamp and A Félix-Quiñonez
|
4
|
Lubricant ageing effects on the friction characteristics of wet clutches by Authors K Berglund, P Marklund and R Larsson
|
5
|
On the effects of sliding velocity and operating pressure differential in rotary O-ring seals by Authors K Lingerkar and M M Khonsari
|
6
|
Experimental studies on the dynamic characteristics of rolling element bearings by Authors N J Ali and J M García
|
7
|
Fourier transform infrared and ultraviolet-visible investigation of swift heavy 100 MeV Ag-ion- and 75 MeV oxygen-ion-irradiated polyvinylidene fluoride thin films by Authors D S Rana, D K Chaturvedi and J K Quamara
|
8
|
Characterization of Ti-CN-a:C films prepared by pulsed-dc bias sputtering by Authors F Bulbul and İ Efeoglu
|
Volume 224, Number 8 / 2010 |
1
|
Model-based virtual surface texturing for concentrated conformal-contact lubrication by Authors D Zhu, T Nanbu, N Ren, Y Yasuda and Q J Wang
|
2
|
Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime by Authors L Mourier, D Mazuyer, F-P Ninove and A A Lubrecht
|
3
|
Effects of surface topography on lubrication film formation within elastohydrodynamic and mixed lubricated non-conformal contacts by Authors I Krupka, M Hartl and P Svoboda
|
4
|
Surface analysis of the elastomer in lip seals run against shafts manufactured with micro-cavity patterns by Authors V Kanakasabai, K H Warren and L S Stephens
|
5
|
Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach by Authors M B Dobrica, M Fillon, M D Pascovici and T Cicone
|
6
|
Inertia effects in textured hydrodynamic contacts by Authors S Cupillard, S Glavatskih and M J Cervantes
|
7
|
Theoretical analysis of an infinitely wide rigid cylinder rotating over a grooved surface in hydrodynamic conditions by Authors V G Marian, A Predescu and M D Pascovici
|
8
|
Hydrodynamic force and moment in pure rolling lubricated contacts. Part 1: line contacts by Authors N Biboulet and L Houpert
|
9
|
Hydrodynamic force and moment in pure rolling lubricated contacts. Part 2: point contacts by Authors N Biboulet and L Houpert
|