Ana səhifə

Tribology Research References Quarterly Update- vol. 4, 2010


Yüklə 0.83 Mb.
səhifə3/10
tarix18.07.2016
ölçüsü0.83 Mb.
1   2   3   4   5   6   7   8   9   10



Tribology International

Volume 43, Issues 5-6 (2010)


1

Special Issue on Second International Conference on Advanced Tribology (iCAT2008) by Nalam Satyanarayana, Jian Huei Choo, Christina Lim, Xianting Zeng, Sujeet K Sinha, Seh Chun Lim

2

2nd International Conference on Advanced Tribology (iCAT2008), 3–5 December 2008, Singapore by Nalam Satyanarayana, Jian Huei Choo, Christina Lim, Xianting Zeng, Sujeet K. Sinha, Seh Chun Lim

3

Dissipated energy and friction coefficient evolution during fretting wear of solid lubricant coatings by Alexander M. Korsunsky, Kyungmok Kim

4

Corrosion wear behaviors of micro-arc oxidation coating of Al2O3 on 2024Al in different aqueous environments at fretting contact by Hong-yan Ding, Zhen-dong Dai, Suresh C. Skuiry, David Hui

5

Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al2O3-13%TiO2 coatings by W. Tian, Y. Wang, Y. Yang

6

Comparative tribological study of air plasma sprayed WC–12%Co coating versus conventional hard chromium electrodeposit by M. Heydarzadeh Sohi, F. Ghadami

7

Wear characteristics of Cr3C2–NiCr and WC–Co coatings deposited by LPG fueled HVOF by Hazoor S. Sidhu, Buta S. Sidhu, S. Prakash

8

Corrosion–erosion wear behaviors of 13Cr24Mn0.44N stainless steel in saline–sand slurry by Zhou Guanghong, Ding Hongyan, Zhang Yue, Li Nianlian

9

Influence of tilt angle of plate on friction and transfer layer—A study of aluminium pin sliding against steel plate by Pradeep L. Menezes, Kishore, Satish V. Kailas, M.S. Bobji

10

Fretting wear behaviors of a railway axle steel by J.F. Zheng, J. Luo, J.L. Mo, J.F. Peng, X.S. Jin, M.H. Zhu

11

Study on rotational fretting wear of 7075 aluminum alloy by J.L. Mo, M.H. Zhu, J.F. Zheng, J. Luo, Z.R. Zhou

12

Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti–6Al–4V by É. Martin, M. Azzi, G.A. Salishchev, J. Szpunar

13

Friction-induced ultra-fine and nanocrystalline structures on metal surfaces in dry sliding by Hirotaka Kato, Masato Sasase, Nobuaki Suiya

14

Microstructural and abrasive characteristics of high carbon Fe–Cr–C hardfacing alloy by Chia-Ming Chang, Yen-Chun Chen, Weite Wu

15.

Effect of amount of antimony on sliding wear resistance of white metal by Sotomi Ishihara, Kiyoshi Tamura, Takahito Goshima

16.

Abrasive wear behaviour of SiC/2014 aluminium composite by Yusuf Sahin

17.

The abrasive wear resistance of TIC and (Ti,W)C-reinforced Fe–17Mn austenitic steel matrix composites by Ashok Kumar Srivastava, Karabi Das

18.

Sliding wear resistance of Al-alloy particulate composites: An assessment on its efficacy by Rupa Dasgupta

19.

Influence of fiber orientation on abrasive wear of unidirectionally reinforced carbon fiber–polyetherimide composites by Mohit Sharma, I. Mohan Rao, Jayashree Bijwe

20.

Role of different metallic fillers in non-asbestos organic (NAO) friction composites for controlling sensitivity of coefficient of friction to load and speed by Mukesh Kumar, Jayashree Bijwe

21.

Effects of electric field on characteristics of nano-confined lubricant films with ZDDP additive by G.X. Xie, G. Li, J.B. Luo, S.H. Liu

22.

Correlation between performance and boundary layers in high speed bearings lubricated with polymer-enhanced greases by M.M. Gatzen, F. Pape, C. Bruening, H.H. Gatzen, H.F. Arlinghaus, G.W.G. Poll

23.

Wear properties of DLC-coated steel rollers running with highly contaminated lubrication by F. He, P.L. Wong, X. Zhou

24.

Full and partial boundary slippage effect on squeeze film bearings by F. Guo, P.L. Wong

25.

Investigation of laminated fabric cages used in rolling bearings by ToF-SIMS by U. Gunst, W.-R. Zabel, N. Valle, H.-N. Migeon, G. Poll, H.F. Arlinghaus

26.

ZDDP content in mineral and synthetic motor base oils and its effect on electrostatic and tribological phenomena in a rotating shaft–oil–lip seal system by Juliusz B. Gajewski, Marek J. GLogowski, Kazimierz Gatner, Marek Gawlinski

25.

Transient elastohydrodynamic lubrication in artificial knee joint with non-Newtonian fluids by Mongkol Mongkolwongrojn, Khanittha Wongseedakaew, Francis E. Kennedy

26.

Stability analysis of rough journal bearings under TEHL with non-Newtonian lubricants by Mongkol Mongkolwongrojn, Chatchai Aiumpronsin

27.

Effect of surface topography on mixed lubrication film formation during start up under rolling/sliding conditions by I. Krupka, P. Svoboda, M. Hartl

28.

Relation between low temperature fluidity and sound velocity of lubricating oil by Sobahan Mia, Nobuyoshi Ohno

29.

Tribological studies on a novel borate ester containing benzothiazol-2-yl and disulfide groups as multifunctional additive by Jiusheng Li, Xiaohong Xu, Yonggang Wang, Tianhui Ren

30.

Effect of R600a on tribological behavior of sintered steel under starved lubrication by Kemal Sariibrahimoglu, Huseyin Kizil, Mahmut F. Aksit, Ihsan Efeoglu, Husnu Kerpicci

31.

A study of misaligned electrorheological fluid lubricated hole-entry hybrid journal bearing by J. Sharana Basavaraja, Satish C. Sharma, Satish C. Jain

32.

The effect of Coulomb friction on the static performance of foil journal bearings by Dong-Hyun Lee, Young-Cheol Kim, Kyung-Woong Kim

33.

Vegetable oils as a potential cutting fluid—An evolution by Y.M. Shashidhara, S.R. Jayaram

34.

Study of preparation and tribological properties of rare earth nanoparticles in lubricating oil by Rende Liu, Xicheng Wei, Dehua Tao, Yuan Zhao

35.

A novel tribometer for the measurement of friction in MEMS by I.S.Y. Ku, T. Reddyhoff, J.H. Choo, A.S. Holmes, H.A. Spikes

36.

Interconnection between the contact angle (adhesion) hysteresis, slippage on a nanorough solid wall and phononic friction by Claudiu Valentin Suciu, Hozumi Goto

37.

In situ transmission electron microscope study of single asperity sliding contacts by K. Anantheshwara, M.S. Bobji

38

Investigation of the strain distribution with lubrication during the deep drawing process by T.S. Yang

39.

Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718 by Abhay Bhatt, Helmi Attia, R. Vargas, V. Thomson

40.

A novel method to improve finish on non-magnetic surfaces in magneto-rheological abrasive honing process by A. Sadiq, M.S. Shunmugam

41.

Development of novel clutch utilizing self-locking mechanisms of belt by Keiji Imado, Hiroki Tominaga, Atsuyoshi Miura, Yasuaki Yamaguchi, Tsuneo Kawagoe

42.

Finite element analysis of the effect of coefficient of friction on the drawability by G. Chandra Mohan Reddy, P.V.R. Ravindra Reddy, T.A. Janardhan Reddy

43.

Modelling of contact and friction in aluminium extrusion by X. Ma, M.B. De Rooij, D.J. Schipper

44.

Comparison between rubber–ice and sand–ice friction and the effect of loose snow contamination by Alex Klein-Paste, Nirmal K. Sinha

45.

Microstructural investigation of ice surfaces after rubber–ice and sand–ice sliding friction tests by Alex Klein-Paste, Nirmal K. Sinha

46.

Effect of bovine serum constituents on the surface of the tribological pair alumina/alumina nanocomposites for total hip replacement by C. Morillo, Y. Sawae, T. Murakami

47.

Influence of photoelectric stimulation with different spectrum on sliding friction behaviors of locust Oedaleus infernalis Saussure (Orthoptera: Acrididae) on slippery plates by Wang Lixin, Zhou Qiang, Niu HuLi

48.

Compaction pressure, wall friction and surface roughness upon compaction strength of Andrographis paniculata tablets by Y.A. Yusof, S.K. Ng, N.L. Chin, R.A. Talib

49.

Welding of tribologically optimized polyetheretherketone films with metallic substrates by T. Bayerl, A.K. Schlarb

50.

Parametric study on balance ratio of mechanical face seal in steam environment by S.S. Goilkar, Harish Hirani

51.

Feature based characterization of worn surfaces for a sliding test by Q. Hao, D. Bianchi, M. Kaestner, E. Reithmeier

52.

Effect of surface laser texture on friction properties of nickel-based composite by Jianliang Li, Dangsheng Xiong, Jihui Dai, Zhongjia Huang, Rajnesh Tyagi

Volume 43, Issues 7-10 (2010)


1

Elevated-temperature tribology of metallic materials by Peter J. Blau

2

Tribocorrosion behaviour of overlay welded Ni–Cr 625 alloy in sulphuric and nitric acids: Electrochemical and chemical effects by N. Espallargas, S. Mischler

3

Interpretation of electrochemical measurements made during micro-scale abrasion-corrosion by R.J.K. Wood, D. Sun, M.R. Thakare, A. de Frutos Rozas, J.A. Wharton

4

Effects of carbon content on the high temperature friction and wear of chromium carbonitride coatings by T. Polcar, T. Vitu, L. Cvrcek, J. Vyskocil, A. Cavaleiro

5

Wear behaviour of hardfaced Fe-Cr-C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperature by E. Badisch, C. Katsich, H. Winkelmann, F. Franek, Manish Roy

6

Evaluation of fretting corrosion behaviour of CP-Ti for orthopaedic implant applications by Satendra Kumar, T.S.N. Sankara Narayanan, S. Ganesh Sundara Raman, S.K. Seshadri

7

Preparation and characterization of spark-anodized Al-alloys: Physical, chemical and tribological properties by N. Godja, N. Kiss, Ch. Löcker, A. Schindel, A. Gavrilovic, J. Wosik, R. Mann, J. Wendrinsky, A. Merstallinger, G.E Nauer

8

Erosion behaviors of human tooth enamel at different depth by J. Zheng, F. Xiao, L. Zheng, L.M. Qian, Z.R. Zhou

9

Mapping erosion-corrosion of carbon steel in oil exploration conditions: Some new approaches to characterizing mechanisms and synergies by M.M. Stack, G.H. Abdulrahman

10

Leeds–Lyon Symposium Special Issue: Multi-facets of Tribology by Ton Lubrecht, Yves Berthier, Gérard Dalmaz

11

A transient 2D-finite-element approach for the simulation of mixed lubrication effects of reciprocating hydraulic rod seals by T. Schmidt, M. André, G. Poll

12

Film height optimization of dynamically loaded hydrodynamic slider bearings by Ron A.J. van Ostayen

13

Evaluation of the real contact area in three-body dry friction by micro-thermal analysis by Philippe Stempflé, Olivier Pantalé, Toufik Djilali, Richard Kouitat Njiwa, Xavier Bourrat, Jamal Takadoum

14

Interpretation of the hardness of worn DLC particles using micro-Raman spectroscopy by P.L. Wong, F. He, X. Zhou

15.

Molecular dynamics simulation of surface energy and ZDDP effects on friction in nano-scale lubricated contacts by Hassan Berro, Nicolas Fillot, Philippe Vergne

16.

An emissivity-corrected method for the accurate radiometric measurement of transient surface temperatures during braking by H. Kasem, J. Thevenet, X. Boidin, M. Siroux, P. Dufrenoy, B. Desmet, Y. Desplanques

17.

3D two scale X-FEM crack model with interfacial frictional contact: Application to fretting fatigue by E. Pierres, M.C. Baietto, A. Gravouil, G. Morales-Espejel

18.

Influence of pressure and temperature dependence of thermal properties of a lubricant on the behaviour of circular TEHD contacts by W. Habchi, P. Vergne, S. Bair, O. Andersson, D. Eyheramendy, G.E. Morales-Espejel

19.

Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implants by Leiming Gao, Peiran Yang, Ian Dymond, John Fisher, Zhongmin Jin

20.

Influence of tooth profile and oil formulation on gear power loss by Luís Magalhães, Ramiro Martins, Cristiano Locateli, Jorge Seabra

21.

A study of Biolox® delta subject to water lubricated reciprocating wear by L. Ma, W.M. Rainforth

22.

Tribological characteristics of one-process and two-process cylinder liner honed surfaces under reciprocating sliding conditions by Wieslaw Grabon, Pawel Pawlus, Jaroslaw Sep

23.

Experimental study of real roughness attenuation in concentrated contacts by P. Šperka, I. Křupka, M. Hartl

24.

Double-Newtonian rheology in a model piston-ring cylinder-wall contact by P. Charles, M. Elfassi, A.A. Lubrecht

25.

Lubricant film formation properties of alkyl imidazolium tetrafluoroborate and hexafluorophosphate ionic liquids by H. Arora, P.M. Cann

26.

The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems by A.L. Mohd Tobi, J. Ding, S. Pearson, S.B. Leen, P.H. Shipway

27.

The effect of surface texturing on seizure resistance of a steel–bronze assembly by Waldemar Koszela, Lidia Galda, Andrzej Dzierwa, Pawel Pawlus

28.

Erosive wear on ceramic materials obtained from solid residuals and volcanic ashes by J. Vite, M. Vite, M. Castillo, J.R. Laguna-Camacho, J. Soto, O. Susarrey
1   2   3   4   5   6   7   8   9   10


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©atelim.com 2016
rəhbərliyinə müraciət