-
|
D. Bhaduri, R. Kumar, A.K. Jain, A.K. Chattopadhyay, On tribological behaviour and application of TiN and MoS2-Ti composite coating for enhancing performance of monolayer cBN grinding wheel
| -
|
L.J.W. Graham, D.R. Lester, J. Wu, Quantification of erosion distributions in complex geometries
| -
|
Jiupeng Song, Mahdiar Valefi, Matthijn de Rooij, Dirk J. Schipper, A mechanical model for surface layer formation on self-lubricating ceramic composites
| -
|
Anirban Mahato, Thomas A. Perry, Vikram Jayaram, S.K. Biswas, Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium-silicon alloy flat
| -
|
Yong-Sheng Zhang, Li-Tian Hu, Jian-Min Chen, Wei-Min Liu, Lubrication behavior of Y-TZP/Al2O3/Mo nanocomposites at high temperature
| -
|
Bingjun Yu, Linmao Qian, Hanshan Dong, Jiaxin Yu, Zhongrong Zhou, Friction-induced hillocks on monocrystalline silicon in atmosphere and in vacuum
| -
|
E. Baussan, M.-A. Bueno, R.M. Rossi, S. Derler, Experiments and modelling of skin-knitted fabric friction
| -
|
Essam R.I. Mahmoud, Makoto Takahashi, Toshiya Shibayanagi, Kenji Ikeuchi, Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing
| -
|
H. Klaasen, J. Kubarsepp, T. Roosaar, M. Viljus, R. Traksmaa, Adhesive wear performance of hardmetals and cermets
| -
|
Gabi Nehme, Ramoun Mourhatch, Pranesh B. Aswath, Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditions
| -
|
Toshihira Irisawa, Haruki Kobayashi, Koichi Fujihira, Masatoshi Shioya, Junichi Kaneko, A method to determine wear rates of fibers and its application to polymeric fibers added with inorganic fillers
| -
|
Herve Pelletier, Christian Gauthier, Robert Schirrer, Influence of the friction coefficient on the contact geometry during scratch onto amorphous polymers
| -
|
M.G. Gee, Model scratch corrosion studies for WC/Co hardmetals
| -
|
J. Swingler, The resolution dependence of measured fractal characteristics for a real un-dismantled electrical contact interface
| -
|
L. Steiner, V. Bouvier, U. May, V. Hegadekatte, N. Huber, Modelling of unlubricated oscillating sliding wear of DLC-coatings considering surface topography, oxidation and graphitisation
| -
|
C.H. Hager Jr., J. Hu, C. Muratore, A.A. Voevodin, R. Grandhi, The mechanisms of gross slip fretting wear on nickel oxide/Ti6Al4V mated surfaces
| Volume 268, Issues 11-12, Pages 1205-1550 (12 May 2010) | -
|
Manuela Reichelt, Ullrich Gunst, Thomas Wolf, Joachim Mayer, Heinrich F. Arlinghaus, Peter W. Gold, Nanoindentation, TEM and ToF-SIMS studies of the tribological layer system of cylindrical roller thrust bearings lubricated with different oil additive formulations
| -
|
N.A. Fleck, Th. Zisis, The erosion of EB-PVD thermal barrier coatings: The competition between mechanisms
| -
|
Tomoo Kubo, Hidetaka Nanao, Shigeyuki Mori, Yuji Enomoto, Hao Nie, Hiroo Nomura, Chemical analysis of boundary lubrication film formed on metal nitride coatings with ethanol by means of TOF-SIMS
| -
|
Nicolas Argibay, Jason A. Bares, James H. Keith, Gerald R. Bourne, W. Gregory Sawyer, Copper-beryllium metal fiber brushes in high current density sliding electrical contacts
| -
|
G. Sutter, N. Ranc, Flash temperature measurement during dry friction process at high sliding speed
| -
|
F.C. Zhang, B. Lv, C.L. Zheng, Q. Zou, M. Zhang, M. Li, T.S. Wang, Microstructure of the worn surfaces of a bainitic steel railway crossing
| -
|
M. Anil, V.C. Srivastava, M.K. Ghosh, S.N. Ojha, Influence of tin content on tribological characteristics of spray formed Al-Si alloys
| -
|
Jacob A. Warner, Laura G. Gladkis, Thomas Geruschke, Reiner Vianden, Paul N. Smith, Jennifer M. Scarvell, Wolf-Dietrich Zeitz, Heiko Timmers, Tracing wear debris pathways via ion-implanted indium-111
| -
|
S. Kumar, V. Subramanya Sarma, B.S. Murty, High temperature wear behavior of Al-4Cu-TiB2 in situ composites
| -
|
Michael P. Pereira, Wenyi Yan, Bernard F. Rolfe, Sliding distance, contact pressure and wear in sheet metal stamping
| -
|
Andreas Goedecke, Robert L. Jackson, Randolf Mock, Asperity creep under constant force boundary conditions
| -
|
J. Sanes, F.J. Carrion, M.D. Bermudez, Effect of the addition of room temperature ionic liquid and ZnO nanoparticles on the wear and scratch resistance of epoxy resin
| -
|
S.D.A. Lawes, S.V. Hainsworth, M.E. Fitzpatrick, Impact wear testing of diamond-like carbon films for engine valve-tappet surfaces
| -
|
Kanchan Kumari, K. Anand, Michelangelo Bellacci, Massimo Giannozzi, Effect of microstructure on abrasive wear behavior of thermally sprayed WC-10Co-4Cr coatings
| -
|
P.A. Bellette, P.A. Meehan, W.J.T. Daniel, Contact induced wear filtering and its influence on corrugation growth
| -
|
Jose Manuel Arroyo, Anselmo Eduardo Diniz, Milton Sergio Fernandes de Lima, Wear performance of laser precoating treated cemented carbide milling tools
| -
|
Huijun Yang, Ruiying Luo, Suyi Han, Midan Li, Effect of the ratio of graphite/pitch coke on the mechanical and tribological properties of copper-carbon composites
| -
|
B. Raeymaekers, S. Helm, R. Brunner, E.B. Fanslau, F.E. Talke, Investigation of fretting wear at the dimple/gimbal interface in a hard disk drive suspension
| -
|
Umar Nirmal, B.F. Yousif, Dirk Rilling, P.V. Brevern, Effect of betelnut fibres treatment and contact conditions on adhesive wear and frictional performance of polyester composites
| -
|
K.K. Manesh, B. Ramamoorthy, M. Singaperumal, Numerical generation of anisotropic 3D non-Gaussian engineering surfaces with specified 3D surface roughness parameters
| -
|
Franck Jourdan, A numerical model for multidirectional wear
| -
|
P. Suresh Babu, Bikramjit Basu, G. Sundararajan, Abrasive wear behavior of detonation sprayed WC-12Co coatings: Influence of decarburization and abrasive characteristics
| -
|
H.Q. Sun, R. Irwan, H. Huang, G.W. Stachowiak, Surface characteristics and removal mechanism of cemented tungsten carbides in nanoscratching
| -
|
A. Cruzado, M. Hartelt, R. Wasche, M.A. Urchegui, X. Gomez, Fretting wear of thin steel wires. Part 1: Influence of contact pressure
| -
|
I.G. Goryacheva, E.V. Torskaya, Modeling of fatigue wear of a two-layered elastic half-space in contact with periodic system of indenters
| -
|
Hsiao Yeh Chu, Wen Chen Hsu, Jen FinLin, Scuffing mechanism during oil-lubricated block-on-ring test with diamond nanoparticles as oil additive
| -
|
B.M. Lane, M. Shi, T.A. Dow, R. Scattergood, Diamond tool wear when machining Al6061 and 1215 steel
| -
|
C.-A. Manier, G. Theiler, D. Spaltmann, M. Woydt, H. Ziegele, Benchmark of thin film coatings for lubricated slip-rolling contacts
| -
|
V.N. Aderikha, V.A. Shapovalov, Effect of filler surface properties on structure, mechanical and tribological behavior of PTFE-carbon black composites
| -
|
H.G. Zhu, Y.L. Ai, J. Min, Q. Wu, H.Z. Wang, Dry sliding wear behavior of Al-based composites fabricated by exothermic dispersion reaction in an Al-ZrO2-C system
| -
|
D.K. Kolluri, X. Boidin, Y. Desplanques, G. Degallaix, A.K. Ghosh, M. Kumar, J. Bijwe, Effect of Natural Graphite Particle size in friction materials on thermal localisation phenomenon during stop-braking
| -
|
Pavinee Padipatvuthikul, Fadi D. Jarad, Lawrence Mair, Determination of surface and subsurface fatigue damage in dental composites
| -
|
P. Cavaliere, P. Prete, Tribomechanisms of pure electrodeposited Ni at ultra-fine and nanoscale level
| -
|
K. Bonny, P. De Baets, Y. Perez, J. Vleugels, B. Lauwers, Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact
| -
|
P. Berlet, M. Dienwiebel, M. Scherge, The effect of sample finishing on the tribology of metal/metal lubricated contacts
| -
|
Rukiye Ertan, Nurettin Yavuz, An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materials
| -
|
Mario R. Rosenberger, Alicia E. Ares, Isaura P. Gatti, Carlos E. Schvezov, Wear resistance of dilute Zn-Al alloys
| -
|
Satendra Kumar, B. Sivakumar, T.S.N. Sankara Narayanan, S. Ganesh Sundara Raman, S.K. Seshadri, Fretting-corrosion mapping of CP-Ti in Ringer's solution
| -
|
Mathias Woydt, Rolf Wasche, The history of the Stribeck curve and ball bearing steels: The role of Adolf Martens
| -
|
Xu Wanli, Qin Li, Chen Haosheng, Chen Darong, Erosion and abrasion on mild carbon steel surface by steam containing SiC microparticles
| | |