April 2010, Volume 132, Issue 2 |
-
|
Revisiting the Cattaneo–Mindlin Concept of Interfacial Slip in Tangentially Loaded Compliant Bodies by Izhak Etsion
|
-
|
Transient Thermal Effects and Heat Partition in Sliding Contacts by R. Bosman and M. B. de Rooij
|
-
|
Simulation of Fretting Wear in Half-Plane Geometries—Part II: Analysis of the Transient Wear Problem Using Quadratic Programming by D. Nowell
|
-
|
Partial Slip Contact Analysis on Three-Dimensional Elastic Layered Half Space by Zhan-Jiang Wang, Wen-Zhong Wang, Hui Wang, Dong Zhu, and Yuan-Zhong Hu
|
-
|
A Voronoi FE Fatigue Damage Model for Life Scatter in Rolling Contacts by Behrooz Jalalahmadi and Farshid Sadeghi
|
-
|
A Numerical Study of Friction in Isothermal EHD Rolling-Sliding Sphere-Plane Contacts With Spinning by H. Dormois, N. Fillot, W. Habchi, G. Dalmaz, P. Vergne, G. E. Morales-Espejel, and E. Ioannides
|
-
|
An Efficient Elastic Displacement Analysis Procedure for Simulating Transient Conformal-Contact Elastohydrodynamic Lubrication Systems by Shangwu Xiong, Chih Lin, Yansong Wang, Wing Kam Liu, and Q. Jane Wang
|
-
|
Design and Performance of Slurry Erosion Tester by A. Abouel-Kasem, Y. M. Abd-elrhman, K. M. Emara, and S. M. Ahmed
|
-
|
Erosive Wear Model of Slurry Pump Impeller by Veselin Batalović
|
-
|
Wear Mode Comparison of High-Performance Inconel Alloys by Grant R. Fox and Hong Liang
|
-
|
A Gas Lubrication Equation for High Knudsen Number Flows and Striated Rough Surfaces by James White
|
-
|
Elastohydrodynamics Applied to Active Tilting-Pad Journal Bearings by Asger M. Haugaard and Ilmar F. Santos
|
-
|
Influence of Wear on the Performance of Multirecess Hydrostatic Journal Bearing Operating With Micropolar Lubricant by E. Rajasekhar Nicodemus and Satish C. Sharma
|
-
|
Thermohydrodynamic Analyses of Bump Air Foil Bearings With Detailed Thermal Model of Foil Structures and Rotor by Donghyun Lee and Daejong Kim
|
-
|
A Lattice-Boltzmann Approach to Fluid Film Lubrication by Bogdan R. Kucinschi and Abdollah A. Afjeh
|
-
|
Analytical Model of Bump-Type Foil Bearings Using a Link-Spring Structure and a Finite-Element Shell Model by Kai Feng and Shigehiko Kaneko
|
-
|
The Critical Conditions for Tribo-Demagnetization of Perpendicular Magnetic Recording Disk Under Sliding Contact by W. F. Jiang and D. F. Diao
|
-
|
Experimental and FEA Scratch of Magnetic Storage Thin-Film Disks to Correlate Magnetic Signal Degradation With Permanent Deformation by Raja R. Katta, Andreas A. Polycarpou, Sung-Chang Lee, and Mike Suk
|
-
|
A Scale Dependent Simulation of Liquid Lubricated Textured Surfaces by Robert L. Jackson
|
-
|
A Numerical Study of Labyrinth Seal Flutter by L. di Mare, M. Imregun, J. S. Green, and A. I. Sayma
|
-
|
Experimental Study of the Performance of Static Seals Based on Measurements of Real Contact Area Using Thin Polycarbonate Films by Isami Nitta and Yoshio Matsuzaki
|
-
|
Assessment of Elliptical Conformal Hertz Analysis Applied to Constant Velocity Joints by Chul-Hee Lee and Andreas A. Polycarpou
|
-
|
Flying Clearance Distribution With Thermal Flying Height Control in Hard Disk Drives by Sung-Chang Lee, George W. Tyndall, and Mike Suk
|
-
|
An Analytical Model for the Basic Design Calculations of Journal Bearings by R. K. Naffin and L. Chang
|
-
|
Analytical Solution to the Hydrodynamic Lubrication of Fan-Shaped Thrust Step Bearings by Shuangbiao Liu, W. Wayne Chen, and Diann Y. Hua
|
-
|
A Simple Method to Calculate Contact Factor Used in Average Flow Model by Fanming Meng, Q. Jane Wang, Diann Hua, and Shuangbiao Liu
|
July 2010, Volume 132, Issue 3 |
-
|
Study of a Brittle Transparent Disk Under Dry RCF Conditions by Arthur Francisco, Houssein Abbouchi, and Bernard Villechaise
|
-
|
Effects of Nanostructured Additives on Boundary Lubrication for Potential Artificial Joint Applications by Alice Pendleton, Prasenjit Kar, Subrata Kundu, Sahar Houssamy, and Hong Liang
|
-
|
Tribological Behaviors of PTFE-Based Composites Filled With Nanoscale Lamellar Structure Expanded Graphite by Yu-lin Yang, Zhi-ning Jia, Jin-jiang Chen, and Bing-li Fan
|
-
|
Self Lubricating Composite Coatings Containing TiC–MnS or WC-MnS Compounds Prepared by the Plasma Transferred Arc (PTA) Technique by P. Skarvelis, G. D. Papadimitriou, and M. Perraki
|
-
|
Contact Area and Static Friction of Rough Surfaces With High Plasticity Index by L. Li, I. Etsion, and F. E. Talke
|
-
|
Plasto-Elastohydrodynamic Lubrication (PEHL) in Point Contacts by Ning Ren, Dong Zhu, W. W. Chen, and Q. Jane Wang
|
-
|
Effect of Thread and Bearing Friction Coefficients on the Self-Loosening of Preloaded Countersunk-Head Bolts Under Periodic Transverse Excitation by Amro M. Zaki, Sayed A. Nassar, and Xianjie Yang
|
-
|
Application of Elastic-Plastic Static Friction Models to Rough Surfaces With Asymmetric Asperity Distribution by Chul-Hee Lee, Melih Eriten, and Andreas A. Polycarpou
|
-
|
Thermodynamic Model of the Metallic Friction Process by Maria Maciąg
|
-
|
Comparison Between Elastic Foundation and Contact Force Models in Wear Analysis of Planar Multibody System by Saad Mukras, Nam H. Kim, Nathan A. Mauntler, Tony Schmitz, and W. Gregory Sawyer
|
-
|
On Squeeze Film Damping in Microsystems by Victor Marrero, Diana-Andra Borca-Tasciuc, and John Tichy
|
-
|
Design and Evaluation of Damped Air Bearings at Head-Disk Interface by Jianhua Li, Junguo Xu, Yuki Shimizu, Masayuki Honchi, Kyosuke Ono, and Yukio Kato
|
-
|
Surface Roughness Effects on Air Bearing Performance Over a Wide Range of Knudsen and Wave Numbers by James White
|
-
|
The Effect of Deformation Speed on Frictional Behavior by Tip Test by Ki-Ho Jung and Yong-Taek Im
|
-
|
Feasibility of Gas-Expanded Lubricants for Increased Energy Efficiency in Tilting-Pad Journal Bearings by Andres Clarens, Amir Younan, Shibo Wang, and Paul Allaire
|
-
|
Effect of Friction Modifiers and Antiwear Additives on the Tribological Performance of a Hydrogenated DLC Coating by T. Haque, A. Morina, and A. Neville
|
-
|
On the Prediction of Running-In Behavior in Mixed-Lubrication Line Contact by Saleh Akbarzadeh and M. M. Khonsari
|
-
|
Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical Seal: Large Contact Force by Adolfo Delgado and Luis San Andrés
|
-
|
A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Oil Seal Rings by Adolfo Delgado and Luis San Andrés
|
-
|
Elastohydrodynamic Line-Contact of Compressible Shear Thinning Fluids With Consideration of the Surface Roughness by J. Y. Jang and M. M. Khonsari
|
-
|
An Overview of the Hardness Differential Required for Abrasion by Giuseppe Pintaude
|
-
|
Slurry Pump Impeller Wear: Testing by Veselin Batalović
|
-
|
Study of Wear Self-Repair of Steel 100Cr6 Rubbed With Lubricants Modified With Schiff Base Copper Complex by Xinlei Gao, Li Wu, Jian Li, and Wanzhen Gao
|