10 Fargo Way
WELSHPOOL 6106
Western Australia
Phone: 08 9358 1555
Fax: 08 9358 1888
www.agmaster.com.au
E-mail: sales@agmaster.com.au
INTERSTATE REPRESENTATIVES
SOUTH AUSTRALIA NEW SOUTH WALES VICTORIA & QUEENSLAND
David Humphris Rowan Cox Dan Bolwell
0408 828 971 0488 995 566 0417 565 091
davidh@agmaster.com.au rowanc@agmaster.com.au dan@agmaster.com.au
2016 CATALOGUE
SEEDING KITS
PRESSWHEELS
HARROWS
MAINTENANCE TIPS
ASSEMBLY INSTRUCTIONS
E&OE
Products and Prices are subject to change without notice Issued: January 2016
Check our website for the latest information on products and prices
TABLE OF CONTENTS
SEEDING KITS & REPLACEMENT PARTS Page
Seeker Boot Kits including Liquid Kits & Pipe Adaptors 3-4
Seeker Kits for Morris Contour 2, MC2 Liquid Kits & Pipe Adaptors 5
Morris Contour 2 Leg, Points and 2015 Model Upgrade 6
Seeker Boot Parts 7
Point and Boot Kits for double hole tines NT11 8
Point and Boot Kit Options NT11 9
Point and Holder Kits 10
Boot & Bracket Kits 11
Point & Flexi Boot Kits 12
Flexi Boot & Bracket Kits 13
Flexi Boot & Bracket Spare Parts 14
Trash Guards Kits & Spare Parts 15
Liquid Fertiliser Kits & Spare Parts NT11 16
Replacement Points NT11, NT09 & NT05 17
Replacement Brackets & Boots NT11, NT09 & NT05 18
Accessories; Sweep Adaptors, Point Holders & Retainer Pins NT11 19
Closer Plates for NT11, Flexi Boots, NT09, NT08, NT07, NT05, NT03 20
Point & Boot Kits for Single Bolt Tines NT08 21
Replacement Parts NT08 22-23
Points NT03, Conservapak 23
Kits & Replacement Parts for Concorde Tines 24
HARROWS
Star Harrows & Coil Harrows 25
Telescopic Mounting Arms 26
HARROW PARTS
Tele Arms, Turntable, Gang Frame 27-28
Stars, Coils & Axles 29
PRESSWHEELS
Presswheel Modules 30
Tyre Profile Options 31
Fixed Extension Arms & Double Outriggers 32
Mount Bar & Telescopic Extension Arms 33
PRESSWHEEL PARTS
Fixed Extensions 34
Presswheel Module Parts 35-37
Presswheel Tyres, Rims, Seals 38
FASTENERS
Bolts, Nuts & Washers 39
U Bolts, V Bolts, Backing Plates 40
UPGRADES 41
MAINTENANCE TIPS 42
TIGHTENING TORQUE CHARTS 43
ASSEMBLY INSTRUCTIONS 44-52
QUICK REFERENCE GUIDE 53-54
NT11 SEEKER BOOT SEEDING KITS
For double hole tines only. Boot options are twin row or offset. Point options are; 12mm or 16mm standard and liquid, 16mm winged. Optional boot for granular fertiliser.
(see page 4)
8cm apart 4cm
Prices Exc Inc
PHS1621 NT11 16mm Point, Holder, Twin Row Seeker Boot, ½” holes by 1¾” curved foot
This suits Morris 400lb, Flexicoil 350lb (with drilled out holes to ½”) $245.00 $269.50
PHS1623 NT11 16mm Point, Holder, Twin Row Seeker Boot, ½” holes by 2¼” curved foot
This suits Flexicoil 550/650lb, Morris 650lb, JD 1810-1830 and others $245.00 $269.50
PHS1625 NT11 16mm Point, Holder, Twin Row Seeker Boot, ½” holes by 1¾” flat foot
This suits Bougault, Horwood Bagshaw, Shearer Universal, Ezee-On $245.00 $269.50
To change Boot to Offset Seeker Boot change second last digit of part number to 1. Price will be less $65 ex GST
i.e. PHS1613 $180.00 $198.00
Other point options and price difference: See page 9
Seeker Boot hose hole size is 32mm. See page 4 for pipe adaptors if delivery hose size greater than 32mm O/D
Optional Seeker Fertiliser Boot
SF5420 Seeker Fertiliser Boot (Needs 2x BNW122 @ 2.50 each) $ 40.00 $ 44.00
For optional Granular Fertiliser Boot in PHS kits change prefix to PSF and add 42 to end of numbers
i.e. PSF162142 $285.00 $313.50
Optional Liquid Kit for Seeker Boot
SLK51 SLK52
SLK51 For directing liquid fertiliser tube to back of PT1190 liquid point $ 6.00 $ 6.60
Includes 10mm x 80mm stainless pipe casing, M6 stainless locking screw,
M10 stainless P Clamp, M6 x 16 stainless bolt
SLK52 For directing liquid wetter tube to seed row in offset boot. $ 4.00 $ 4.40
Includes 10mm x 130 mm stainless pipe casing and M6 stainless locking screw
SEEKER BOOT (No Point)
Bolts included. Point and Holder not included. Will only fit with Agmaster Points
SBB21 Twin Row Seeker Boot and bolts to suit ½” holes by 1¾” curved foot
This suits Morris 400lb, Flexicoil 350lb (with drilled out holes to ½”) $175.00 $192.50
SBB23 Twin Row Seeker Boot and Bolts to suit ½” holes by 2¼” curved foot
This suits Flexicoil 550/650lb, Morris 650lb, JD 1810-1830 and others $175.00 $192.50
SBB25 Twin Row Seeker Boot and Bolts to suit ½” holes by 1¾” flat foot
This suits Bougault, Horwood Bagshaw, Shearer Universal, Ezee-On $175.00 $192.50
To change Boot to Offset Seeker Boot in SBB kits change second last digit to 1 Price will be less $65 ex GST
i.e. SBB13 $110.00 $121.00
Optional Seeker Fertiliser Boot
SF5420 Seeker Fertiliser Boot – (Needs 2x BNW122 @ 2.50ea) $ 40.00 $ 44.00
For optional Granular Fertiliser Boot in kit change prefix to SBF and add 42 to end of numbers
i.e. SBF2142 - (includes all bolts) $215.00 $236.50
Seeker Boot hose hole size is 32mm. See below for pipe adaptors if delivery hose size is greater than 32 O/D
Pipe Adaptors
PA5610 Pipe Adaptor for 28 I/D or 35 O/D Hose $ 6.00 $ 6.60
PA5620 Pipe Adaptor for 32 I/D Hose $ 4.00 $ 4.40
SEEKER BOOT SEEDING KITS FOR MORRIS CONTOUR 2
Point and Boot Kits Prices
Exc Inc
PSM0428 Standard 12mm Point, Twin Row Seeker Boot $310.00 $341.00
PSM0528 Liquid 12mm point, Twin Row Seeker Boot $340.00 $374.00
Includes SLK53, liquid kit for Morris Contour 2 seeker boot
Optional Seeker Fertiliser Boot
SF5420 Seeker Fertiliser Boot – (Needs 2x BNW122 @ 2.50ea) $ 40.00 $ 44.00
For optional Granular Fertiliser Boot in PSM kits change prefix of part no. to PSF and add 42 to end
i.e. PSF042842 $350.00 $385.00
Replacement point Morris Contour 2 PT5040 Standard 12mm $ 60.00 $ 66.00
PT5050 Liquid 12mm $ 70.00 $ 77.00
NB: Single offset boot not available for Morris Contour 2
Optional Liquid Kit for Morris Contour 2 Seeker Boot – Included in PSM0528 Kit
SLK53 For directing liquid fertiliser to back of Morris Contour 2 point
Includes 10mm x 80mm stainless pipe casing, M6 stainless locking screw $ 4.00 $ 4.40
Seeker Boot hose hole size is 32mm. See below for pipe adaptors if delivery hose size is greater than 32 O/D
Pipe Adaptors
PA5610 Pipe Adaptor for 28 I/D or 35 O/D Hose $ 6.00 $ 6.60
PA5620 Pipe Adaptor for 32 I/D Hose $ 4.00 $ 4.40
MORRIS CONTOUR 2 LEG & POINTS
SL5340 PT5040 PT5050
Prices
Exc Inc
SL5340 *** MC2 Seeker leg to hold point & seeker boot $ 80.00 $ 88.00
PT5040 **** 12mm Standard point to suit MC2 SB5340 $ 60.00 $ 66.00
PT5050 **** 12mm Liquid point to suit MC2 SB5340 $ 70.00 $ 77.00
*** Requires 2x BNW122 Bolt, Nut & Washer $2.50ea $2.75ea
**** Requires 1x BNW12112 Bolt, Nut & Washer $2.50ea $2.75ea
Morris Contour 2 Leg & Point – For Upgrading 2015 Model (1 piece point)
SLP3404 SLP3405
SLP3404 Seeker MC2 leg & 12mm standard point – includes bolts $140.00 $154.00
SLP3405 Seeker MC2 leg & 12mm liquid point – includes bolts $150.00 $165.00
SEEKER BOOT PARTS
Boots – Single Offset
SB5110 * Seeker Offset, 1¾” spacing, curved $108.00 $118.80
SB5130 ** Seeker Offset, 2¼” spacing, curved $108.00 $118.80
SB5150 * Seeker Offset, 1¾” spacing, flat $108.00 $118.80
Boots – Twin Row
SB5210 * Seeker Twin, 1 ¾” spacing, curved $173.00 $190.30
SB5230 ** Seeker Twin, 2 ¼” spacing, curved $173.00 $190.30
SB5250 * Seeker Twin, 1 ¾” spacing, flat $173.00 $190.30
SB5280 *** Seeker Twin, Morris Contour 2 $170.00 $187.00
Seeker Fertiliser Boot
SB5420 *** Seeker Fertiliser Boot $ 40.00 $ 44.00
* Requires 2x BNW12234 Bolt, Nut & Washer $2.50ea $2.75ea
** Requires 2x BNW123 Bolt, Nut & Washer $2.50ea $2.75ea
*** Requires 2x BNW122 Bolt, Nut & Washer $2.50ea $2.75ea
**** Requires 1x BNW12112 Bolt, Nut & Washer $2.50ea $2.75ea
Liquid Kit Parts for Seeker Boots
SL5510 Liquid Casing 10mm x 80mm long, shaped $ 4.00 $ 4.40
SL5520 Liquid Casing 10mm x 130mm long, straight $ 4.00 $ 4.40
GS6M6S Grub screw M6 x 6, stainless $ 0.20 $ 0.22
PC10S P clamp, 10mm, stainless $ 2.00 $ 2.20
BO6M16S Bolt 6mm x 16mm, stainless $ 0.50 $ 0.55
NT11 POINT & BOOT KITS
NT11 series Kits are for double bolt tines and come standard with Agmaster’s ‘Slip and Clip’ system for changing Points. Included in the Kit are Point, Point Holder, Bracket, Boot, U Bolt, Bolts and Nuts. These Kits are standard with 16mm Point and 50mm Single System Boot. Other options are available for Points and different Boots.
Prices NT11 Point & Boot Kits
Exc Incl
16mm Standard Kit $160.00 $176.00
12mm Standard Kit $153.00 $168.30
For other Point & Boot options and price differences see page 9
Part No
PHB166155 NT11 16mm Point, 50mm Boot, ½" x 1¾" bolt centres. Curved Foot
This suits regular flat on tines with ½" x 1¾ " (12.7mm x 44.5mm) bolt centres, e.g. Morris Concept 400lb, Use this kit for Flexicoil 350lb flat on tines reamed out to ½" holes
PHB160255 NT11 16mm Point, 50mm Boot, 7/16" x 1¾" bolt centres. Curved Foot
Suits regular flat-on tines with 7/16" x 1¾" (11.5mm x 44.5mm) bolt centres, e.g. Flexicoil 350lb
PHB166355 NT11 16mm Point, 50mm Boot, ½”x 2¼” bolt centres. Curved Foot
Suits regular flat-on tines with ½”x 2 ¼” (12.7mm x 57mm) bolt centres, e.g. Flexicoil 550/Lb+
Morris 600LB+, John Deere 1810 -1830
PHB166555 NT11 16mm Point, 50mm Boot, ½" x 1¾” bolt centres. Flatter Foot
This suits Flat on tines with ½" x 1¾”" bolt centres (12.7mm x 44.5mm) e.g. Bourgault, Ezee-On, Horwood Bagshaw F/O, Shearer Universal
PHB160455 NT11 16mm Point, 50mm Boot, AFM Edge-On Tine
PHB160655 NT11 16mm Point, 50mm Boot, Flexicoil Edge-On Tine
PHB160855 NT11 16mm Point, 50mm Boot, Gason Scaritill Edge-On Tine
PHB160955 NT11 16mm Point, 50mm Boot, Horwood Bagshaw Scaribar Edge-On Tine
PHB161155 NT11 16mm Point, 50mm Boot, Simplicity, Gason Hydratill
The following alternative NT11 Kits are supplied with a 12mm Point and 40mm Single System Boot for tines with breakout less than 400lb
Part No
PHB126154 NT11 12mm Point, 40mm Single System Boot i.e. Morris 400Lb, Flexicoil reamed to ½”
PHB120254 NT11 12mm Point, 40mm Single System Boot 7/16” x 1 ¾” bolt centres i.e. Flexicoil 350Lb
PHB126554 NT11 12mm Point, 40mm Single System Boot i.e. Bourgault, Ezee-On, H/B Flat On
PHB120554 NT11 12mm Point, 40mm Single System Boot i.e Forward Delta Edge-On Tine
PHB120754 NT11 12mm Point, 40mm Single System Boot i.e Gason 5100 Edge-On Tine
For tines not listed above contact Agmaster
Replacement Parts for these kits are on pages 17-19, 24
POINT OPTIONS:
12mm 12mm 14mm 14mm 16mm 16mm 16mm
Lo Thro Lo Thro Liquid Winged Liquid
(12) (15) (14) (17) (16) (13) (19)
To select a different Point option the first two (2) digits of the part number need to be changed with the following:
Price Difference exc GST
12mm Point : 12 No difference to NT11 12mm Kit
12mm Liquid Fertilizer Point : 15 $15 extra to NT11 12mm Kit
14mm Lo Thro Point : 14 No difference to NT11 16mm Kit
14mm Lo Thro Liquid Point : 17 $15 extra to NT11 16mm Kit
16mm Point : 16 No difference to NT11 16mm Kit
16mm Winged Point : 13 $25 extra to NT11 16mm Kit
16mm Liquid Fertilizer Point : 19 $15 extra to NT11 16mm Kit
Example: A Flexicoil 550lb Kit with 16mm Winged Point will be a PHB136355 - $185 exc GST
A Flexicoil 550lb Kit with 16mm Liquid Fertilizer Point will be PHB196355 - $175 exc GST
It is NOT recommended to use a 12mm point on tines with breakout force above 400lb (180kg)
Soft Point Option: A softer tip on the points for extremely rocky conditions is available for all NT11 Kits and
replacement points. These are identified by the point being painted Red. To order this option an “R” needs to be
added to the part number.
Example: A NT11 Flexicoil 550lb Kit with a soft (red) point will be PHB166355R
Prices for Replacement Points are on Page 17
BOOT OPTIONS:
Single Y tube Side by Side Split System
Pipe size on all boots is 38.4mm inside diameter and 42.4mm outside diameter
To select a different Boot option the last two (2) digits of the part number need to be changed as follows:
Price Difference exc GST
40mm Closer Single System Boot : 54 No difference
50mm Closer Single System Boot : 55 No difference
65mm Closer ‘Y’ Tube Single System Boot : 37 $30 extra
65mm Closer Side-by-Side Boot : 38 $30 extra
65mm Closer Split System Boot : 39 $50 extra
Example: A Flexicoil 350lb Kit with 65mm Split System Boot will be a PHB160239 - $210 exc GST
Prices for Replacement Boots are on Page 18
NT11 POINT & HOLDER KITS
These kits include the Retainer Pin but do not include bolts
Point & Holder Kits for double hole tines with ½” holes (1 ¾” or 2 ¼” spacing)
Prices
Part No Exc Inc
PTH1210 NT11 12mm Point, Holder, Retainer Pin $ 65.00 $ 71.50
PTH1410 NT11 14mm Lo Thro Point, Holder, Retainer Pin $ 72.00 $ 79.20
PTH1610 NT11 16mm Point, Holder, Retainer Pin $ 72.00 $ 79.20
PTH1310 NT11 16mm Winged Point, Holder, Retainer Pin $ 97.00 $106.70
PTH1510 Liquid Fertilizer Point 12mm, Holder, Retainer Pin $ 80.00 $ 88.00
PTH1710 Liquid Fertilizer Point 14mm Lo Thro, Holder, Retainer Pin $ 87.00 $ 95.70
PTH1910 Liquid Fertilizer Point 16mm, Holder, Retainer Pin $ 87.00 $ 95.70
Point & Holder Kits for double hole tines with 7/16” holes (1 ¾” spacing)
Prices Part No Exc Inc
PTH1211 NT11 12mm Point, Holder, Retainer Pin $ 65.00 $ 71.50
PTH1411 NT11 14mm Lo Thro Point, Holder, Retainer Pin $ 72.00 $ 79.20
PTH1611 NT11 16mm Point, Holder, Retainer Pin $ 72.00 $ 79.20
PTH1311 NT11 16mm Winged Point, Holder, Retainer Pin $ 97.00 $106.70
PTH1511 Liquid Fertilizer Point 12mm, Holder, Retainer Pin $ 80.00 $ 88.00
PTH1711 Liquid Fertilizer Point 14mm Lo Thro, Holder, Retainer Pin $ 87.00 $ 95.70
PTH1911 Liquid Fertilizer Point 16mm, Holder, Retainer Pin $ 87.00 $ 95.70
Soft Point Option: A softer tip on the points for extremely rocky conditions is available for all Kits and replacement points. These are identified by the point being painted Red. To order this option an “R” needs to be added to the part number.
Example: PTH1611R
Replacement Parts for these kits are on pages 17 & 19
NT11 BOOT & BRACKET KITS
These assemblies include Bracket, Boot, U-Bolt around tine and all Bolts & Nuts including those to go through the tine.
Part No
BRB6155 Bracket ½" x 1 ¾" bolt centres, Boot 50mm (curved) Morris 400lb,Flexicoil 350lb reamed out
BRB0255 Bracket 7/16" x 1¾" bolt centres, Boot 50mm Flexicoil 350lb Flat-on Tines
BRB6355 Bracket ½” x 2 ¼” bolt centres, Boot 50mm (curved) Flexicoil 550lb+, Morris 650lb+,
John Deere 1810-1830
BRB6555 Bracket ½" x 1 ¾” bolt centres, Boot 50mm (flatter) Bourgualt, Ezee-On, Horwood Flat on,
Shearer Universal
BRB0455 Bracket, Boot 50mm Single System AFM Edge-On Tine
BRB0554 Bracket, Boot 40mm Single System Forward Delta Edge-On Tine
BRB0655 Bracket, Boot 50mm Single System Flexicoil Edge-On Tine
BRB0754 Bracket, Boot 40mm Single System Gason 5100 Edge-On Tine
BRB0855 Bracket, Boot 50mm Single System Gason Scaritill Edge-On Tine
BRB0955 Bracket, Boot 50mm Single System Horward Bagshaw Edge-On
BRB1155 Bracket, Boot 50mm Single System Simplicity/Gason Hydratill
Prices
Exc Inc
Standard Kit $90.00 $99.00
For other Boot options and price differences see page 9
Replacement Parts for these kits are on pages 18 & 24
NT11 POINT & FLEXI BOOT KITS
These kits are only available for double bolt tines and come with Agmaster’s ‘Slip and Clip’ system for
changing points. Standard kits include a 16mm Point and 40mm Closer Plate.
Part No
PHB167184 NT11 Flexi, 16mm Point, 40mm Closer, ½" x 1¾" bolt centres
This suits regular flat tines with ½" x 1¾" (12.7mm x 44.5mm) bolt centres e.g. Morris 400lb, Bourgault, Ezee-On, Horward Bagshaw flat on
Use this Kit for Flexicoil 265 / 350 Flat On Tines Reamed out to ½"
PHB167284 NT11 Flexi, 16mm Point, 40mm Closer, 7/16" x 1¾" bolt centres
This suits regular flat on tines with 7/16" x 1¾" (11.5mm x 44.5mm) bolt centres
e.g. Flexicoil 350lb Flat On
PHB167384 NT11 Flexi, 16mm Point, 40mm Closer, ½" x 2¼" bolt centres
This suits regular flat tines with ½" x 2¼" (12.7mm x 57mm) bolt centres
e.g. Flexicoil 550lb, JD1810
PHB167484 NT11 Flexi, 16mm Point, 40mm Closer, Double Hole Edge-On Tine with ½" bolt holes
e.g. Flexicoil E/O, Horward Bagshaw E/O, Gason, Simplicity
Prices
Exc Inc
Standard Kit $205.00 $225.50
For other Point options and price differences see page 9
Soft Point Option: A softer tip on the points for extremely rocky conditions is available for all NT11 Kits and
replacement points. These are identified by the point being painted Red. To order this option an “R” needs to be
added to the part number.
Example: PHB167284R
To select a different Closer option on the Flexi Boot the last two (2) digits of the part number needs to be changed as follows:
50mm Closer Plate : 85
(50mm Closers can be used in lighter soils for a wider spread)
Example: An Edge On Tine kit with 16mm Point, 50mm Flexi Boot Closer will be a PHB167485
Replacement Parts for these kits are on pages 14, 17, 19 & 24
NT11 FLEXI BOOT & BRACKET KITS
These assemblies are designed to suit double hole tines. Standard Flexi Boots include a 40mm closer plate
Prices Exc Inc
Boot Kit $135.00 $148.50
Part No
BRB7184 NT11 Flexi boot, 40mm Closer & Bracket for flat tines, ½" x 1¾" bolt centres
This suits regular flat tines with ½" x 1¾" (12.7mm x 44.5mm) bolts centres e.g. Morris 400lb, Bourgault, Ezee-On, Horward Bagshaw flat on
Use this Kit for Flexicoil 265 / 350 Tines Reamed out to ½"
BRB7284 NT11 Flexi boot, 40mm Closer & Bracket for flat tines, 7/16" x 1¾" bolt centres
This suits regular flat on tines with 7/16" x 1¾" (12mm x 44.5mm) bolt centres, e.g. Flexicoil 350lb Flat On
BRB7384 NT11 Flexi boot, 40mm Closer & Bracket for flat tines, ½" x 2 ¼ " bolt centres
This suits regular flat tines with ½" x 2¼" (12.7mm x 57mm) bolt centres e.g. Flexicoil 550lb, JD1810
BRB7484 NT11 Flexi boot, 40mm Closer & Bracket for Edge-On tines, ½" bolt holes
Flexicoil E/O, Horward Bagshaw E/O, Gason, Simplicity
To select a different Closer option on the Flexi Boot the last two (2) digits of the product number needs to be changed as follows:
50mm Closer Plate : 85
(50mm Closer Plates can be used in lighter soils for a wider spread)
Example: Flexi Boot Kit to suit a Morris 400lb tine with 50mm closer will be a BRB7185
Replacement Parts for these kits can be found on the next page & page 24
FLEXI BOOT REPLACEMENT PARTS
Flexi Boots
FB2840 FB2870 HC52T FB2834 SP2880
FB2850 FB2835
Prices
Exc Inc
FB2870 Flexi Boot hose 340mm long $25.00 $27.50
HC52T Hose Clamp $ 5.00 $ 5.50
FB2840 Flexi Boot 40mm Closer – Inc SP2880 $70.00 $77.00
FB2850 Flexi Boot 50mm Closer – Inc SP2880 $70.00 $77.00
FB2834 Hose Insert with 40mm Closer $35.00 $38.50
FB2835 Hose Insert with 50mm Closer $35.00 $38.50
SP2880 Spring Inner 200 x 37 $10.00 $11.00
Flexi Boot Brackets
FB2710 FB2800 FB2790 FB2810 FB2820
FB2740
FB2710 Suits two bolt flat tines *** $35.00 $38.50
FB2740 Suits two bolt edge on tines **** $35.00 $38.50
FB2800 Hose support bracket $10.00 $11.00
FB2790 Upgrade bracket spring boot to flexi boot $25.00 $27.50
FB2810 Support Saddle $ 5.00 $ 5.50
FB2820 Grip Clamp $ 5.00 $ 5.50
UBN2007 M10 U-Bolt to clamp hose to bracket $ 4.00 $ 4.40
*** Uses UBN2001 – U-Bolt M12, 65 x 52, with Nuts & Washers
**** Uses UBN2002 – U-Bolt M12, 90 x 30, with Nuts & Washers
TRASHGUARD KITS
Trashguards suit the NT11 Series Points & Holders
Prices
Exc Inc
Trashguard Kit $25.00 $27.50
Part No
TGU1170 NT11 Trashguard, U Bolt & Lug – Flat on Tines
TGU1177 NT11 Trashguard, U Bolt & Lug – Edge on Tines
TRASHGUARD PARTS
Will only fit up to NT11 series holders and PT1580 Bolt on Points on double hole tines
TG1170 UB1003 TG1175
UB1004 TG1173
Prices
Exc Inc
TGU1170 Trashguard, U-Bolt and Lug Kit – Flat on $25.00 $27.50
TGU1177 Trashguard, U-Bolt and Lug Kit– Edge on $25.00 $27.50
TG1170 NT11 Trashguard $18.00 $19.80
UBN1003 U Bolt M10 75 x 52 with nuts – for Flat on Tines $ 4.00 $ 4.40
UBN1004 U Bolt M10 110 x 30 with nuts – for Edge on Tines $ 4.00 $ 4.40
TG1175 U Bolt Lug to suit UB1003 $ 3.00 $ 3.30
TG1173 U Bolt Lug to suit UB1004 $ 3.00 $ 3.30
LIQUID KITS
Liquid Kits piggy back the bracket of the NT11 Fixed Boot Kits
Prices
Exc Inc
Liquid Kit – Single $24.00 $25.30
Liquid Kit – Double $38.00 $41.80
Part No
LFK51 NT11 Liquid Fertiliser Kit – Single to take flexible 3mm tube with 6mm casing
LFK52 NT11 Liquid Fertiliser Kit – Double to take flexible 3mm tube with 6mm casing
LFK53 NT11 Liquid Fertiliser Kit – Single to take 4-6mm flexible tube with 10mm casing
LFK54 NT11 Liquid Fertiliser Kit – Double to take 4-6mm flexible tube with 10mm casing
LIQUID KIT PARTS
LF2510 LF2520 LF2550 LF2570 PC6S
LF2530 LF2540 LF2580 PC10S
Part No
LFK51 NT11 Liquid Fertiliser Kit – Single – suit 3mm tube/6mm casing $24.00 $26.40
LFK52 NT11 Liquid Fertiliser Kit – Double – suit 3mm tube/6mm casing $38.00 $41.80
LFK53 NT11 Liquid Fertiliser Kit – Single – suit 4-6mm tube/10mm casing $24.00 $26.40
LF2510 Liquid Fertiliser Clamp Plate – Single – suit 3mm tube/6mm casing $13.00 $14.30
LF2520 Liquid Fertiliser Clamp Plate – Double – suit 3mm tube/6mm casing $17.00 $18.70
LF2530 Liquid Fertiliser Clamp Plate – Single – suit 4-6mm tube/10mm casing $13.00 $14.30
LF2540 Liquid Fertiliser Clamp Plate – Double – suit 4-6mm tube/10mm casing $17.00 $18.70
LF2550 Liquid Fertiliser ‘P’ Clamp WC – suit 6mm casing $ 4.00 $ 4.40
LF2570 Liquid Fertiliser casing 6mm Shaped – to suit 3mm tube $ 5.00 $ 5.50
LF2580 Liquid Fertiliser casing 10mm Shaped – to suit 4-6mm tube $ 5.00 $ 5.50
PC6S P Clamp 6mm Stainless Steel $ 2.00 $ 2.20
PC10S P Clamp 10mm Stainless Steel $ 2.00 $ 2.20
BON6M16S Bolt 6mm x 16mm Stainless Steel and Nyloc Nut $ 0.60 $ 0.66
|