Ana səhifə

Magnolia 6167 A/b description


Yüklə 164 Kb.
tarix25.06.2016
ölçüsü164 Kb.




Magnolia 6167 A/B




Description

Magnolia 6167 A/B is a two-part, flame retardant epoxy having good peel strength and high temperature properties. Magnolia 6167 A/B is designed to be a lower viscosity version of Magnolia 6166 A/B.


This product is recognized on the QPL to the CMNP008 Type I, Class B.

Properties





Property

Magnolia 6167 A/B







Cure Schedule

Set for Handling Strength – 6-12 hours @ 75°F; Full Cure – 7 days @ 75°F

Mix Ratio – Parts By Weight (Part A:Part B)

100:54

Pot Life, 3 ounces @ 77°F

60 minutes

Shelf Life

A: 6 months B: 6 months @ 75°F

Specific Gravity

Part A: 1.25

Part B: 1.15

Mix: 1.20


SPI Classification

A: 4 B: 4

Flash Point

A: >200°F B: >200°F

Flammable Under 100°F

A: No B: No

Combustible 100-200°F

A: No B: No

Corrosive

A: No B: Yes

Freight Class

A: 1 B: 2


Other Properties and Information

Properties after 7 day cure @ 75°F


Flame Retardance (tested per BMS 5-28, 12 second vertical burn)

Burn Time 0 seconds

Extinguish Time 0 seconds
Note: Adhesion tested on FPL etched 2024 T-3 Aluminum.
Lap Shear Strength, ASTM D-1002, Room Temperature test 4000 psi

Lap Shear Strength, ASTM D-1002, 180°F test 2000 psi


T-Peel, ASTM D-1876, Room Temperature 15 piw



DANGER

FIRST-AID




  • May cause severe irritation.

  • Do not get in eyes, on skin or clothing.

  • Do not inhale vapors.

  • Wear rubber gloves & aprons.

  • Use with adequate ventilation.

  • Wash thoroughly after handling.






  • Eyes - Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

  • Skin - Wash immediately with soap and water.

  • Clothing - Remove clothing and wash before reuse.





For Industrial Use ONLY. Keep container closed. Do Not Reuse this Container.





Updated: 08/30/02 Page 2


The information on this sheet is based upon data obtained by our own research and is considered accurate. However, no warranty is expressed or implied regarding the results to be obtained from the use of this data or that any such use will not infringe on any patent. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for this particular purpose.



Copyright © 2007, Magnolia Plastics, Inc. All Rights Reserved, including the right of reproduction in whole or in part in any form. The stylized Magnolia Plastics logo is a registered trademark of Magnolia Plastics, Inc.

Magnolia 6167 A/B Page of

6/25/2016


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©atelim.com 2016
rəhbərliyinə müraciət