Ana səhifə

International organisation for standardisation organisation internationale de normalisation


Yüklə 1.39 Mb.
səhifə10/23
tarix25.06.2016
ölçüsü1.39 Mb.
1   ...   6   7   8   9   10   11   12   13   ...   23

2.4.3 Specification of the Transport Stream syntax and semantics

The following syntax describes a stream of bytes. Transport Stream packets shall be 188 bytes long.



2.4.3.1 Transport Stream






Table 2-1 -- Transport Stream
Syntax

No. of bits

Mnemonic

MPEG_transport_stream() {







do {







}










2.4.3.2 Transport Stream packet layer






Table 2-2 -- ITU T Rec. H.222.0†|†ISO/IEC 13818 transport packet
Syntax




No. of bits

Mnemonic

transport_packet(){










sync_byte




8

bslbf

}













2.4.3.3 Semantic definition of fields in Transport Stream packet layer



sync_byte -- The sync_byte is a fixed 8 bit field whose value is '0100 0111' (0x47). Sync_byte emulation in the choice of values for other regularly occurring fields, such as PID, should be avoided.
transport_error_indicator -- The transport_error_indicator is a 1 bit flag. When set to '1' it indicates that at least 1 uncorrectable bit error exists in the associated Transport Stream packet. This bit may be set to '1' by entities external to the transport layer. When set to '1' this bit shall not be reset to '0' unless the bit value(s) in error have been corrected.
payload_unit_start_indicator -- The payload_unit_start_indicator is a 1 bit flag which has normative meaning for Transport Stream packets that carry PES packets (refer to 2.4.3.6 on page 33) or PSI data (refer to 2.4.4 on page 44).
When the payload of the Transport Stream packet contains PES packet data, the payload_unit_start_indicator has the following significance: A '1' indicates that the payload of this Transport Stream packet will commence with the first byte of a PES packet and a '0' indicates no PES packet shall start in this Transport Stream packet. If the payload_unit_start_indicator is set to '1' then one and only one PES packet starts in this Transport Stream Packet. This also applies to private streams of stream_type 6 (refer to table 2-29 on page 51).
When the payload of the Transport Stream packet contains PSI data, the payload_unit_start_indicator has the following significance: If the Transport Stream packet carries the first byte of a PSI section, the payload_unit_start_indicator value shall be '1', indicating that the first byte of the payload of this Transport Stream packet carries the pointer_field. If the Transport Stream packet does not carry the first byte of a PSI section, the payload_unit_start_indicator value shall be '0', indicating that there is no pointer_field in the payload. Refer to 2.4.4.1 and 2.4.4.2 on page 46. This also applies to private streams of stream_type 5 (refer to table 2-29 on page 51).
For null packets the payload_unit_start_indicator shall be set to '0'.
The meaning of this bit for Transport Stream packets carrying only private data is not defined in this Specification.
transport_priority -- The transport_priority is a 1 bit indicator. When set to '1' it indicates that the associated packet is of greater priority than other packets having the same PID which do not have the bit set to '1'. The transport mechanism can use this to prioritize its data within an elementary stream. Depending on the application the transport_priority field may be coded regardless of the PID or within one PID only. This field may be changed by channel specific encoders or decoders.
PID -- The PID is a 13 bit field, indicating the type of the data stored in the packet payload. PID value 0x0000 is reserved for the Program Association Table (table 2-25 on page 47 ). PID value 0x0001 is reserved for the Conditional Access Table (table 2-27 on page 49 ). PID values 0x0002-0x000F are reserved. PID value 0x1FFF is reserved for null packets.

Table 2-3 -- PID table

value

description

0x0000

Program Association Table

0x0001

Conditional Access Table

0x1FFF


Null packet


Note - The transport packets with PID values 0x0000, 0x0001, and 0x0010-0x1FFE are allowed to carry a PCR.
transport_scrambling_control -- This 2 bit field indicates the scrambling mode of the Transport Stream packet payload. The Transport Stream packet header, and the adaptation field when present, shall not be scrambled. In the case of a null packet the value of the transport_scrambling_control field shall be set to '00'.

Table 2-4 -- Scrambling control values

value

description

00

not scrambled

01

user defined

11


user defined


adaptation_field_control -- This 2 bit field indicates whether this Transport Stream packet header is followed by an adaptation field and/or payload.


Table 2-5 -- Adaptation field control values
value

description

00

reserved for future use by ISO/IEC

10


adaptation_field only, no payload

11

adaptation_field followed by payload

ITU T Rec. H.222.0†|†ISO/IEC 13818-1 decoders shall discard Transport Stream packets with the adaptation_field_control field set to a value of '00'. In the case of a null packet the value of the adaptation_field_control shall be set to '01'.


continuity_counter -- The continuity_counter is a 4 bit field incrementing with each Transport Stream packet with the same PID. The continuity_counter wraps around to 0 after its maximum value. The continuity_counter shall not be incremented when the adaptation_field_control of the packet equals '00' or '10'.
In Transport Streams, duplicate packets may be sent as two, and only two, consecutive Transport Stream packets of the same PID. The duplicate packets shall have the same continuity_counter value as the original packet and the adaptation_field_control field shall be equal to '01' or '11'. In duplicate packets each byte of the original packet shall be duplicated, with the exception that in the program clock reference fields, if present, a valid value shall be encoded.
The continuity_counter in a particular Transport Stream packet is continuous when it differs by a positive value of one from the continuity_counter value in the previous Transport Stream packet of the same PID, or when either of the non-incrementing conditions (adaptation_field_control set to '00' or '10', or duplicate packets as described above) are met. The continuity counter may be discontinuous when the discontinuity_indicator is set to '1' (refer to 2.4.3.4). In the case of a null packet the value of the continuity_counter is undefined.
data_byte -- Data bytes shall be contiguous bytes of data from the PES packets(refer to 2.4.3.6 on page 33), PSI sections(refer to 2.4.4 on page 44), packet stuffing bytes after PSI sections, or private data not in these structures as indicated by the PID. In the case of null packets with PID value 0x1FFF, data_bytes may be assigned any value. The number of data_bytes, N, is specified by 184 minus the number of bytes in the adaptation_field(), as described in 2.4.3.4 below.

1   ...   6   7   8   9   10   11   12   13   ...   23


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©atelim.com 2016
rəhbərliyinə müraciət