Ana səhifə

For highway construction oregon department of transportation salem, oregon


Yüklə 1.12 Mb.
səhifə8/10
tarix25.06.2016
ölçüsü1.12 Mb.
1   2   3   4   5   6   7   8   9   10

(a) Pavement Legend, Type ____ : Arrows Each

(b) Pavement Legend, Type ____ : "ONLY" Each

(c) Pavement Legend, Type ____ : "SCHOOL" Each

(d) Pavement Legend, Type ____ : "SCHOOL" Large Each

(e) Pavement Legend, Type ____ : "CROSSING" Large Each

(f) Pavement Legend, Type ____ : "X-ING" Each

(g) Pavement Legend, Type ____ : "BUS" Each

(h) Pavement Legend, Type ____ : Railroad Crossing Each

(i) Pavement Legend, Type ____ : Railroad Crossing, Narrow Each

(j) Pavement Legend, Type ____ : Railroad Crossing, Bike Each

(k) Pavement Legend, Type ____ : HOV Diamond Each

(l) Pavement Legend, Type ____ : Cattle Guard Each

(m) Pavement Legend, Type ____ : Bicycle Lane Stencil Each

(n) Pavement Legend, Type ____ : Disabled Parking Each

(o) Pavement Legend, Type ____ : On-Street Parking Each

(p) Pavement Legend, Type ____ : Yield Line Triangle Each

(q) Pavement Legend, Type ____ : _______________ Each

(r) Pavement Bar, Type____ Square Foot



(Include only the appropriate following paragraphs for project specific items. Delete the paragraphs that do not apply to the project. Re-alphabetize the paragraphs as appropriate to match the re-alphabetized list above.)
In items (a) and through (br), the type of pavement marking material will be inserted in the first blank.
In item (q), the name of the legend will be inserted in the second blank.
Item (a) includes single or multiple headed arrows as required.
Items (h) and (i) include the R x R symbol, two 24 inch wide white pavement bars placed directly above and directly below the R x R symbol, and one 24 inch wide white stop bar placed prior to the tracks.
Item (j) includes the R x R symbol and one 12 inch wide white pavement bar placed above the R x R symbol.
Item (m) includes the bike lane stencil and arrow.
Item (n) includes the wheelchair stencil only. The 4 inch wide white lines used to mark the disabled parking space and access aisle will be paid for according to 00860.90
Item (o) includes the cross style marking or the end marking.
Item (p) includes one 2 by 3 foot triangle used to form the yield line.
(Obtain information from the Traffic Designer to fill in the blank for item (q).)
Item (q) includes __________________ .
Item (br) includes all transverse pavement markings that are defined as a "BAR", including but not limited to, stop bars, crosswalk bars, chevron bars, transverse median bars, and transverse shoulder bars.
Payment will be payment in full for furnishing and placing all materials, and for furnishing all equipment, labor, and incidentals necessary to complete the work as specified.
Payment for work under this Section will be limited to 75% of the amount due until the Agency has received the signed warranty.

SP905 (03-31-08)
SECTION 00905 - REMOVAL AND REINSTALLATION OF EXISTING SIGNS

Comply with Section 00905 of the Standard Specifications.



SP920 (05-16-08) (This Section requires SP440.)
SECTION 00920 - SIGN SUPPORT FOOTINGS

(Follow all instructions. If there are no instructions above a subsection, paragraph, sentence, or bullet, then include them in the project but make necessary modifications to only include project specific specifications. Delete specifications that do not apply to the project.)
Comply with Section 00920 of the Standard Specifications modified as follows:
00920.80  Measurement - Add the following to the end of this subsection:
(Use the following paragraph and table when minor sign supports are required. Obtain support types and quantities from the Designer.)
The estimated quantities of concrete for minor sign supports are:
Support Type Material Quantity
Multi-post breakaway Concrete 2.3 cu. yd.Yd³

Multi-post breakaway 2.3


(Use the following paragraphs and table when major sign supports are required. Obtain locations and quantities from the Designer. Copy list as necessary for additional locations. Delete what does not apply.)
The estimated quantities of materials for major sign supports are:
Location Material Quantity
Excavation cu. yd.

Backfill cu. yd.

Concrete cu. yd.

Reinforcement pound



Miscellaneous Metal pound

SP930 (09-17-09)
SECTION 00930 - METAL SIGN SUPPORTS

(Follow all instructions. If there are no instructions above a subsection, paragraph, sentence, or bullet, then include them in the project but make necessary modifications to only include project specific specifications. Delete specifications that do not apply to the project.)
Comply with Section 00930 of the Standard Specifications modified as follows:
(Use the following subsection .01 when perforated steel square tube breakaway sign supports or when perforated steel square tube sign supports are included in the project. Delete what does not apply. Check with Designer.)
00930.01  Definitions and Terms - In the "Triangular Base Breakaway Sign Supports, Pipe Breakaway Sign Supports, and Square Tube Breakaway Sign Supports" definition, replace the words "Square Tube Breakaway Sign Supports" with the words "Perforated Steel Square Tube Breakaway Sign Supports".
In the "Pipe Sign Supports and Square Tube Sign Supports" definition, replace the words "Square Tube Sign Supports" with the words "Perforated Steel Square Tube Sign Supports".
In the "Minor Sign Supports" definition, replace the words "Square Tube Breakaway Sign Supports" with the words "Perforated Steel Square Tube Breakaway Sign Supports" and replace the words "Square Tube Sign Supports" with the words "Perforated Steel Square Tube Sign Supports".
(Use the following subsection .01 when mast arm street name sign mounts are included in the project. Delete the subsection number and name when it is already included above. Check with Designer.)
00930.01  Definitions and Terms - Add the following definition to the list of definitions:
Mast Arm Street Name Sign Mounts - This group includes the frame members, attachment channel or bracket, steel bands or cables, and fasteners necessary to install a street name sign on a signal mast arm.
00930.02  Working Drawings - In the paragraph that begins "Working drawings are not…", delete the "Square Tube Sign Supports" bullet.
00930.10  Materials - In the paragraph that begins "Furnish galvanized bolts…", add the words "for Minor Sign Supports" after the words "job site".
In the paragraph that begins "All components of…", replace the sentence that begins "Galvanizing shall conform to…" with the following sentence:
Except for perforated steel square tube breakaway sign supports and for perforated steel square tube sign supports, galvanizing shall conform to the requirements of Section 02530. Galvanize perforated steel square tube breakaway sign supports and perforated steel square tube sign supports according to ASTM A653 G140.
(Use the following subsection .80 to list the estimated quantities of steel. List items by pay item name. Obtain information from the Designer)

00930.80  Measurement - Add the following to the end of this subsection:
The estimated quantities of structural steel are as follows:
Item Estimated Quantity

(Pound)
Exit Number Sign Mounts 80

Multi-post Breakaway 751




(Use the following subsection .90 when either perforated steel square tube breakaway sign supports or perforated steel square tube sign supports are included in the project. Delete what does not apply. Remove the "s" from the word "items" and remove the word "and" when only one pay item is included. Do not change the alpha characters (n) or (q). Check with Designer.)
00930.90  Payment - Replace pay items (n) and (q) with the following pay items:

1   2   3   4   5   6   7   8   9   10


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©atelim.com 2016
rəhbərliyinə müraciət