Ana səhifə

3 part specification


Yüklə 27.66 Kb.
tarix25.06.2016
ölçüsü27.66 Kb.





SECURITRON SPECIFICATION

M32 SERIES MAGNALOCK



3 PART SPECIFICATION




PRODUCT NAME M32 ELECTROMAGNETIC LOCK

PART 1






System Description
Basic use
Limitations


The Model 32 Electromagnetic Lock series provides 600 pounds of traffic control security similar to electric strikes and is recommended for applications where physical assault on the door is not expected. Primary advantages of the Model 32 are its lower cost and more compact size.






References




  • UL FWAX.SA6635

  • UL ALVY. BP7041

  • ULC FWAX7.SA6635

  • ULC UEHX7.BP7041

  • ULC GWXT7.R13976

  • CMS 140

  • UL 10C

  • TUV (Germany) 46890009 Baumuster Gopruft

  • California State Fire Marshall 4138-923:100

  • NYC Board of Standards and Appeals 801-80-SA

  • City of Cleveland S-5-89

  • US Veteran's Administration M.P.3 Part III

  • US Department of Defense Listed

  • ISO 9001

  • ANSI/BHMA A156.23-BHMA Type No. E08501





Warranty

Warranty Continued

SECURITRON MAGNALOCK CORPORATION warrants that it will replace at customer’s request, at any time for any reason, products manufactured and branded by SECURITRON.

SECURITRON will use its best efforts to ship a replacement product by next day air freight at no cost to the customer within 24 hours of SECURITRON’s receipt of the product from customer. If the customer has an account with SECURITRON or a valid credit card, the customer may order an advance replacement product, whereby SECURITRON will charge the customer’s account for the price of the product plus next day air freight, and will credit back to the customer the full amount of the charge, including outbound freight, upon SECURITRON’s receipt of the original product from the customer.
SECURITRON’s sole and exclusive liability, and customer’s sole remedy, is limited to the replacement of the SECURITRON product when delivered to SECURITRON’s facility (freight and insurance charges prepaid by customer). The replacement, at SECURITRON’s sole option, may be the identical item or a newer unit which serves as a functional replacement. In the event that the product type has become obsolete in SECURITRON’s product line, this MAGNACARE warranty will not apply. This MAGNACARE warranty also does not apply to custom, built to order, or non-catalog items, items made by others (such as batteries), returns for payment, distributor stock reductions, returns seeking replacement with anything other than the identical product, or products installed outside of the United States or Canada. This MAGNACARE warranty also does not apply to removal or installation costs.

SECURITRON will not be liable to the purchaser, the customer or anyone else for incidental or consequential damages arising from any defect in, or malfunction of, its products. SECURITRON does not assume any responsibility for damage or injury to person or property due to improper care, storage, handling, abuse, misuse, or an act of God.

EXCEPT AS STATED ABOVE, SECURITRON MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE CONDITION OF ITS PRODUCTS, THEIR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

PART 2






Manufactured Units
Composition
Materials





  • 12 VDC or 24 VDC not field selectable.

  • Rated for three and one-half (3.5 W) watts of power (300Ma @ 12VDC) and (150Ma @ 24VDC).

  • Measures 21 cubic inches (8 inches x 1.75 inch x 1.5 inch)

  • Tensile holding force of at least 600 pounds. A laboratory test certifying the minimum holding force must be submitted by the manufacturer on request.

  • Strike plate is mounted using a steel sex bolt and roll pins to provide a “floating” movement to assure automatic self-alignment with the lock.

  • Lock is mounted using two .25 inch x 2.25 inch machine screws into blind finishing nuts with steel threads that go through the entire body of the lock.

  • Anti-tamper caps provided for the exposed holes.

  • The lock and strike are plated to provide corrosion proofing.

  • The lock is fully sealed in resin to make it tamper and weather proof.

  • Ten feet of jacketed stranded conductor provided for electrical connection.

Optional Features:

  • F - Face drilled for inswing door (Order w/Z-bracket)

  • SC - Senstat™ - Form C (added cost)


Accessories

Available accessories include:



  • XDT Series Exit Delay Logic Timers

  • MXD Series Exit Delay Initiate Device

  • Aluminum Frame Shim Spacer Bracket

  • Stop Filler Plate

  • Universal Header Bracket

  • Header Extension Bracket

  • Concrete / Wood Bracket

  • Z-Bracket for Inswing Doors

  • Dress Cover

  • Lock / Strike Plates for Glass Door Mounting

  • Energy Absorbing Sex Bolt

  • Replacement Strike Plates

  • Paint Kit

  • Installation Kit

  • Miscellaneous Hardware





Finishes

The lock shall be available in standard architectural brushed Stainless Steel - 630/US32D finish with other finishes optional by the use of dress covers.



Part 3

PART 3






Installation

Please refer to instruction manual (Securitron part number: 500-10420)

Instruction manual can also be found on our website: www.securitron.com







ELECTROMAGNETIC LOCKS - Model 32:


The magnetic lock shall be produced by an ISO 9001 certified manufacturer. The lock shall be either 12 VDC or 24 VDC not field selectable The LOCK shall not consume more than three and one-half (3.5 W) watts of power (300Ma @ 12VDC) and (150Ma @ 24VDC). The lock shall not exceed 21 cubic inches (8” x 1.75” x 1.5”) in size. The LOCK shall be capable of providing a pull-apart or tensile holding force of at least 600 pounds. A laboratory test certifying the minimum holding force must be submitted by the manufacturer on request. The STRIKE plate shall be mounted using a steel sex bolt and roll pins to provide a “floating” movement to assure automatic self-alignment with the LOCK. The LOCK shall be mounted using two .25” x 2.25” machine screws into blind finishing nuts with steel threads that go through the entire body of the LOCK. Anti-tamper caps shall be provided for the exposed holes. The LOCK and STRIKE shall be plated to provide corrosion proofing. The LOCK shall be fully sealed in resin to make it tamper and weather proof. The LOCK shall be available in standard architectural brushed Stainless Steel - 630/US32D finish with other finishes optional by the use of dress covers. Ten feet of jacketed stranded conductor shall be provided for electrical connection.

OPTIONS AVAILABLE:

OPTIONAL LOCK STATUS MONITORING

Instantaneous lock status sensing shall be provided without the use of auxiliary switches or reed relays. The ”SC” dry contact SP/DT output to monitor the LOCK’S input power status (Lock powered or not) and strike armature to Lock face mating.

F” version shall provide two mounting holes on the face of the LOCK for mounting on in-swing doors and gates. A “Z” bracket extrusion with an architectural dress cover is available separately as required.




Rev 11-15-01

SECURITRON MAGNALOCK CORP., 550 Vista Blvd., Sparks NV 89434 USA
Tel: (775) 355-5625 (800) MAGLOCK Fax: Mkt. (775) 355-5636, Fax: Admin. (775) 355-5633
Website: www.securitron.com E-mail: info@securitron.com

An ASSA ABLOY Group company




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©atelim.com 2016
rəhbərliyinə müraciət